IV Components

AMSafe® Vial Adapters features:

• DEHP-free
• Latex-free
• AMSafe® PRN connector (male adapter plug)
• Sterile
• Poly pouch

• MicroClave® clear needle-free connector with neutral displacement technology
• DEHP-free, latex-free, sterile
• With multidose vial access spike, clave-type injection site

• MicroClave® needle-free connector
• Blood compatibility
• High pressure compatibility
• Swabbable
• MRI-friendly
• Not limited to 24-hour use
• Non-pyrogenic

• MicroClave® needle-free connector
• Clear markings on dial
• Clamp
• Rotating male Luer lock
• Non-pyrogenic

Curaplex Needle-Free Male Adapter Plug features:

• DEHP-free
• Latex-free
• AMSafe® PRN connector (male adapter plug)
• Sterile
• Poly pouch

The BD Twinpak™ dual cannula device is a truly universal device that simplifies needle-free IV acccess. Featuring two cannulas in one shield—a red hub steel cannula for syringe filling and a clear blunt plastic cannula for safe, needle-free access into a split septum, the dual cannula doubles the performance of traditional methods.

The BD Twinpak dual cannula can be used with BD VersaSafe, Baxter Interlink®, Abbott LifeShield® and McGaw SafeLine™ injection sites as well as vials designed for needle-free access.

• The Twinpak™ dual cannula device, consisting of a 20G steel cannula fill needle and 17G blunt plastic cannula

The Blunt Fill Needle & Blunt Fill Needle w/5 Micron Filter are sterile, non-pyrogenic, single use hollow, bore blunt needles used for draw up of medication. ... The Blunt Fill Needle w/5 Micron Filter is to be used to draw up medication from an ampule only, not for patient injection.

Blunt Filter needle features:

• Eliminates an unnecessary sharp
• 10X the force to penetrate the skin, compared to a conventional needle
• Rapid filling, can cope with viscous medications
• Proven efficacy
• Cost-effective
• Specifically designed to safely bridge medication preparation and administration
• 5µ Filter captures 98% of particulate
• 45° Bevel cut reduces coring of vial stopper
• Only 2.5x the force needed to penetrate a vial stopper
• Sterile
• Single Use
• Hub Type: Luer
• Needle Gauge: 18 G
• Needle Gauge: 1.20 mm
• Needle Length: 1 1/2 in.

The ULTRASITE® valve is a swabbable, capless, 2-way valve for injection/gravity/pump flow or aspiration of fluids. The ULTRASITE valve is a completely closed system. The ULTRASITE valve's technology includes a positive displacement design. Upon Luer removal, the ULTRASITE valve design expels fluid from the system, which helps to prevent blood from backing up into the IV system.

• Priming volume: 0.35mL
• Quick, effortless luer access connection
• High flow promotes rapid fluid delivery
• Microbial barrier design
• Easy to clean and disinfect
• Reduces accidental touch contamination
• Also available, UltraSite® Ag antibacterial luer access device
• UltraSite® valve for aspiration
• Injection or gravity flow of fluid upon insertion of a male luer fitting
• 300psi pressure rated
• DEHP free
• Latex free
• Contains BPA
• PVC free

Clave™ Port Male Adapter Plug features:

• w/ Luer Lock
• Non-DEHP
• Sterile pack
• Nominal Length: 1.205 inch
• Priming Capacity: 0.06mL

The Interlink® vial access cannula are:

• The blue spike in the cannula is used for needleless access of a single-dose vial
• Specifically designed for use with interlink injection sites
• Identified by a colored alert ring around the septum
• Not compatible with conventional injection sites

• DEHP-free

DISCOFIX® Stopcock:

• Priming volume: 0.20mL
• One-way stopcock
• Female luer lock port
• SPIN-LOCK® connector
• Port covers
• Lipid resistant
• DEHP-free
• Latex free

• 5μ Filter with 1-3/4 in flexible straw for fluid aspiration from glass ampules
• 5μ Particulate filter reduces injection of contaminants
• Reduction of contaminants lessens potential side effects, such as phlebitis, caused by infused particulates
• Flexible straw can be angled for easy use
• Needle-free and latex-free
• BPA-free
• Contains DEHP
• Contains PVC

• Dual Side Ports that create turbulence for thorough flushing of injection sites
• Center–Point Design with tapered tip reduces insertion forces by 30% from Interlink Syringe Cannula
• Clear Material for enhanced visualization
• Available pre–attached to Syringes
• Universal Compatibility with Baxter Interlink, Abbott LifeShield, and McGaw SafeLine injection sites as well as vials designed for needleless access

MICRO PIN® Dispensing Pin, non-vented, single use dispensing pin for withdrawal or injection of medication from rubber-stoppered vials.

• Luer lock connector
• DEHP-free
• Latex-free
• BPA-free
• PVC-free

Locking cannula with female Luer.

• Proximal and distal female luer lock connector
• Used for pre-filling unit dose syringes from a large master syringe
• DEHP free
• Latex free
• BPA free
• PVC free

• Sterile package
• Non-DEHP, non-PVC

4-Way Stopcock features:

• Swivel and Male Luer Lock
• Non-vented red cap on middle port
• Non-DEHP formulation
• Latex-free
• Lipid resistant
• Non-PVC

• Contains DEHP, sterile, nonpyrogenic

Buretrol® solution set with 150mL Interlink® burette (valveless) and 3 Interlink® injection sites 6 in, 39 in and 87 in from male luer lock adapter. Approximate drops per mL 60. Approximate overall length 116in (2.9m). Set has tubing that is compatible with the colleague series volumetric infusion pumps and FLO-GARD 6201 and 6301 series volumetric infusion pumps.

• Contains DEHP
• Fluid path is sterile
• Non-pyrogenic

• Priming volume: 0.2mL
• Length: 1.125in (2.9cm)
• Proximal injection port
• Clear body
• Distal male Luer lock connector
• DEHP-free
• Latex-free
• Non-needlefree
• BPA-free
• Contains PVC

LifeShield® Clave® I.V. bag access device - for attachment to a flexible IV container to allow needleless intermittent withdrawal of solution through a swabable luer-activated valve.

• Latex-free
• Non-DEHP

• Low cost injection site
• Male luer connector
• Allows clinician to perform multiple injections when attached to a winged infusion set
• Latex-free

Secondary Administration Sets for Use with ADDitIV® Primary Administration Sets
 

• Priming volume: 8.8mL
• Length: 40in (101.6cm)
• 15 drops/mL
• Universal spike
• Roller clamp
• Spin-Lock® connector
• Plastic bag hanger
• DEHP free
• Latex free

• 5μ Filter with 4 in flexible straw for fluid aspiration from glass ampules
• 5μ Particulate filter reduces injection of contaminants
• Reduction of contaminants lessens potential side effects, such as phlebitis, caused by infused particulates
• Flexible straw can be angled for easy use
• Needle-free and latex-free
• BPA-free
• Contains DEHP
• Contains PVC

• Non-vented
• One-way valve and UltraSite® needle-free valve
• For aspiration of medication from inverted bags or semi-rigid plastic containers
• DEHP-free
• Latex-free
• Available in multiple configurations
• Special flanges and shrouds help to protect against touch contamination
• Luer lock connections for secure engagement

• Female Luer
• Sterile
• DEHP free
• Latex free
• Contains BPA

• Safe Design - A cost-effective solution for fast, needle-free med transfer and reconstitution.
• Smart Packaging - Patented cap design allows users to maintain aseptic technique during application.
• Trusted - Recommended by AORN as a needle-free alternative for dispensing medications to the sterile field.
• Quantity - Sold individually

• Large bore
• With rotating male luer lock adapter
• Non-PVC, non-DEHP