Infusion Pumps & Syringe Pumps

• Pressure infuser bag
• Designed for single patient use
  • Prevents cross contamination and eliminates costly cleaning and repair
• Infu-Stat gauge incorporates a pressure release at 325mm/hg
• Disposable
• Available in 500mL and 1000mL

Butterfly Winged Infusion Set includes thin wall stainless steel cannula, siliconized for easy insertion. Flexible wings hold the needle in position. Set is sterile and individually packaged.

The Infu-Surg® is an individually packaged disposable pressure infuser bag. Ethox International’s Infu-Surg was designed specifically for single patient use to prevent cross contamination. The Infu-Surg was recently redesigned to update its logo, color and silk-screen printing.

Product Features

• Color-coded pressure gauge
• Three-way stopcock for single-hand inflation or deflation
• Pressure relief valve
• Externally inflatable side port
• Available in 500ml and 1000ml models

• Set Length: 292 cm
• Priming Volume: 20 ml
• Bore: 2.7 mm
• 1 Spiked Drip Chamber(s) (Vented/Unvented)
• Drops per ml: 20
• Hydrophobic Air Inlet Filter (with Cap)
• 3 SmartSite® Valve Y Port
• 1 Roller Clamp(s)
• Pump Cassette
• 2 Back-Check Valve(s)
• 1 Male Luer(s)
• Rotating Male Luer(s)
• Natural rubber latex is not part of the material formulation
• DEHP free

Vented/nonvented set for the Alaris Medystem III with no injection sites. Length 115in. Priming volume 20 mL.

Unifusor® features: IV pole loop, fluid bag hook, white nylon cuff, reinforced translucent sleeve, no crimp tubing, palm-fitted handbulb, thumbwheel-type air control, aneroid gauge.

• Disposable

Unifusor is designed for rapid IV infusion and invasive pressure monitoring. The Unifusor line is the clear choice in pressure infusors.

• Manufactured without natural latex
• 100% leak tested during manufacturing process
• Reinforced translucent sleeve (see type of fluid and level through sleeve)
• IV pole loop
• Fluid bag hook

Vented/nonvented set for the Alaris Medystem III with no injection sites. Length 115in. Priming volume 20 mL.

Large inflation bulb has rapid recovery for quick, easy inflation Easy-to-use stopcock and bulb-to-tube fitted seal prevent leaks. High visibility patented gauge accurately indicates bladder pressure nylon netting makes loading easy and permits a clear view of fluid level.

• Disposable
• Vital signs

• Pressure relief valve prevents over inflation (330 mmHg pressure relief)
• Large, oval shaped bulb allows for quick and easy inflation of bladder
• Single-handed inflation and deflation design makes it easy to use and requires minimal training
• Color-coded dial gauge makes for accurate pressure monitoring (0-300 mmHg)
• Three-way stopcock ensures precise control of pressure
• Economical yet dependable pressure infusion choice
• Latex Free
• 1000ml

A precisely honed needle with ultra thin wall design assures ease of penetration and continued access with a single insertion. An exclusive, silicone lubricant provides smoother needle passage through tissue. And with the needles bonded to the wings at a slight downward angle, there is less risk of vessel damage or occlusion of the lumen. Soft and flexible, the wings readily conform to the body contour. Available in different sizes.

Alaris MiniMed 3 AC charger.

Easy and Convenient
The ease of using the TruWave disposable pressure transducer (DPT) is immediately apparent from the ergonomical design that fits your hand, to the cable connector that has been designed to connect and disconnect easily.  The unique flow-through design provides an unimpeded fluid path for easy filling of the system. The protective connector sheath is water resistant and connects without pins. The test port minimizes troubleshooting by testing both the monitoring cables and disposable pressure transducer.

Includes:

• Flush Device
• IV Set (macrodrip)
• 60 inch and 12 inch Pressure Tube
• Two 3-way Stopcocks

Transducer Kit designed for single line includes drip chamber and is disposable.

SmartSite® infusion set features a check valve, 2 needle-free valve ports, 6in and 79in from 2-piece male luer lock. Approximate set length: 116in/295cm. Approximate priming volume: 18mL. 20 drop. Set contains an integrated safety clamp fitment to help prevent accidental free flow.CD2420-0500

The Tru-Wave Pressure Transducer Monitoring Kit includes 48 inch and 12 inch pressure tubing, flush device, Single IV set, macrodrip chamber, and two 3-way stopcocks.

Unifusor® features: IV pole loop, fluid bag hook, white nylon cuff, reinforced translucent sleeve, no crimp tubing, palm-fitted handbulb, thumbwheel-type air control, aneroid gauge.

• Disposable

J8029

Vented/nonvented set for the Alaris Medystem III with no injection sites. Length 115in. Priming volume 20 mL.

Be empowered with a complete infusion system that delivers multiple therapies, for home care, hospitals and ambulatory settings. Sapphire drives the future of infusion care.

• Compact, lightweight device that is intuitive and easy to use
• Consistent accuracy with robust performance
• Single solution fits all, for any infusion need
• Software-driven and built-in adaptability

Kit Includes:

• One (1) Q Core Medical Sapphire Infusion Pump
• One (1) Q Core Medical Sapphire Infusion Pump Mini Cradle – 15042-000-0010
• One (1) Q Core Medical Sapphire Infusion Pump AC Power Cord – 15070-112-0005

Specifications:

• Dimensions: 143mm x 96mm x 49mm (5.63 x 3.78 x 1.93 in.) (H x W x D)
• Weight (excluding battery): 418g (14.7 oz.)
• Infusion device: Volumetric, peristaltic
• Pumping mechanism: Single-channel volumetric, with integral pressure sensor
• Infusion delivery modes: PCEA – Patient Controlled Epirdual Anelgasia & Epidural Intermittent
• KVO rate: Up to 20 mL/h in increments of 0.1 mL/h
• Accuracy: ±2.5% under normal conditions (per IEC60601-2-24 standard)
• Battery: Rechargeable Li-Ion battery 7.4V, 1960 mA/h, 24 hrs @ 125 mL/h (with a fully charged battery and backlight Off)
• Recharge time: up to 6 hrs (when pump is not in operation)
• Flow rate: 0.1 – 99.9 mL/h in increments of 0.1 mL/h; 100 – 999 mL/h in increments of 1 mL/h
• Volume (VTBI): 0.1 – 9999 mL in increments of 0.1 mL
• External power supply: 100-240V 50-60 Hz, 0.6A
• Downstream occlusion: Up to 1.2 Bar (17.4 PSI or 900 mmHg)
• Air in line sensor: A sensor detects single and accumulated bubbles of selectable sizes varying from 0.02 mL – 0.5 mL
• Operating temperature: +5° (41ºF) to 40°C (104ºF)
• Water ingress and dust protection: IP24 according to IEC 60601-1-11
• Prime: Manual or automatic priming (600 mL/h, or from air in line alarm 900 mL/h)

Exel syringes feature:

• Sterile
• Non-toxic
• Pyrogen-free
• Not made from natural rubber latex

Full Capabilities:

• 2 Infusion Channels - Deliver 2 independent treatment regimens
• 4 Infusion Programs: Continuous, Intermittent, Total parenteral nutrition (TPN) and Patient-controlled analgesia (PCA).
• Piston Mechanism - Delilvers ± 5% accuracy and 1.8 µl linear infusion even at the lowest flow rates your protocols require
• Size: 5.7 inch x 3.3 inch x 1.6 inch
• Weight: 15.9 oz.
• Battery-Powered - uses 1 rechargeable lithium-ion battery
• Includes Pole Mount Charger and Standard Power Cord

Dimensions: 5.7in x 3.3in x 1.6in

 

BB100-908PTS

IV Infusion Set for 8100 Series Alaris Infusion Pump. Case of 20

Clip LWR Housing MS3

Knob assembly for the MS3 MedSystem III.

Large inflation bulb has rapid recovery for quick, easy inflation Easy-to-use stopcock and bulb-to-tube fitted seal prevent leaks. High visibility patented gauge accurately indicates bladder pressure nylon netting makes loading easy and permits a clear view of fluid level.

• Disposable
• Vital signs

Low-Vol™ Small Bore Extension Set features:

• Pinch Clamp
• Male Luer Lock
• DEHP Formulation
• Latex-Free
• Priming Volume: 2.4ML
• Length: 60in

AC Adapter for the Infusomat® pump.

Pole clamp assembly for the MS3 MedSystem III.

Rapid Infusion Catheter Exchange Set, 7 French.

Rapid Infusion Catheter Exchange Set, 8.5 French.

Secondary medication set with DUO-VENT spike, male luer lock adapter. Hanger for primary solution container is provided. For use with rigid nonvented and flexible containers and the CLEARLINK system. Approximately 10 drops/mL. Approximate length 37in (93cm). Contains DEHP. Fluid path is sterile, nonpyrogenic.

These are the pole clamp mounting brackets for the MS3 MedSystem III.

This cable allows 3 space pumps to be charged on one power cord.

This item has been discontinued. Please see suggested replacements in alternate products area below.

2861089

CME BodyGuard Wall Charger

SpOS Drug Library Software & Service

• for U Version Pumps
• Drop Ship