Ambu® BlueSensor offers a time and cost efficient range of electrodes that delivers unmatched readings, user convenience and patient comfort. BlueSensor ensures that you don’t get your workflow disrupted by false alarms or have to waste time resolving problems with electrode adhesion. The electrodes give a fast and reliable trace without the need for skin preparation, maximizing comfort for the patient.

• Allows movement of the connected cable without affecting the electrode’s performance.
• The offset connector prevents artifacts from disturbing the readout.
• Easy attachment provides a high level of comfort for the patient and convenience for the user.

• The two rings secure optimal fixture and precise recordings.
• The outer ring is for long-term wear, as adhesion increases with time. The thin and soft material allows the skin to breathe.
• The inner ring on the polymer material “seals” the gel area and ensures an immediate, excellent adhesion.
• Unique construction allows mounting without skin preparation and comfortable removal of the electrodes.

• Wet gel optimizes contact between skin and electrode.
• Lowering skin impedance effectively and immediately.
• Exact volume of wet gel is key to securing the best possible signal.

• Pure silver filament – in contrast to carbon/silver combination.
• Ensures excellent trace quality due to optimized conversion of the signal from biological to electrical.

WhiteSensor Electrodes features:

• Disposable, hypoallergenic white foam
• Center snap, solid gel
• A non-sensitizing, acrylic copolymer coated foam
• Foam coating has been increased and this extra coating per square mm of adhesive maximizes adhesion under diaphoretic and stress conditions
• Soft conformable electrode
• Teardrop shaped, centered snap with conductive solid gel column
• Strong medical grade adhesive
• Maximum adhesion under diaphoretic and stress conditions
• Designed for difficult adhesion conditions that occur in extended patient monitoring or when excessive moisture may be a problem

Dimensions: 1-1/2 Inch H x 1.7 Inch W

Packs of 3, 4, 5,10, 30 and 50 available

• Wet gel electrode
• Suitable for x-ray environment radio-translucent
• Disposable radiolucent foam electrode
• For use where X-rays will be used
• Silver/silver-chloride (Ag/AgCl) sensor
• Non-metallic snap, pre-gelled
• All adult ECG monitoring and MR systems
• Single-patient use
• 45 to 25°C ECG electrode temperature range for storage
• Ideal for defi brilator/monitors and emergency response
• Sealed carbon plastic snaps
• MR safe and compatible with Philips 1.0T, 1.5T and 3.0T MR system
• Each sealed foil pouch provides a moisture barrier to prevent dry-o

• Replacement infant/child reduced energy defibrillation electrodes for use only with LifePak®™ 500 Biphasic AED with pink connector or LifePak®™ 1000 defibrillator, LifePak®™ Express or LifePak®™ CR plus AEDs.
• For use on children less than 8 years of age or less than 55lb.

• Clinically tested for a five-day wear time
• 45 Day out-of-bag Performance
• Packaged in larger packs for efficiencies
• Foam backing is comfortable for patients, occlusive to fluids, and easy to handle for quick application
• Sticky gel delivers excellent trace quality resulting in better patient information
• Without abrader
• Cord delivery - organized application delivery system
• 3M Adhesive provides greater adhesion to diaphoretic skin, which results in better trace quality
• These electrodes provide a larger adhesive and gel areas to improve product performance
• Sticky gel type
• Echo-cardio, stress test, telemetry/holter/event monitoring event
• Up to five days wear time
• 4.06cm x 3.45cm Skin contact size, 10.51sq cm adhesive area, 0.19cm H excluding connector
• 3M™ Durapore™ Adhesive Backing Material Adhesive, Radiolucent Snap Connector, Si coated paper, Release Liner, 'Silver/Silver-Chloride Coated Plastic Sensor Material
• Lifetime: 5 Days recommended max application time, 2 years sealed pouch
• PVC-free

Our radiotransparent and radiotranslucent "one-pad system" enables Curaplex® defib pads to remain with the patient as they move through various care environments.

Features:

• Our 60-inch lead wire offers you more room to work with.
• Curaplex® pads are designed to take up less room on a patient’s body while leaving the conductor plate the standard size. Now, it’s easier to ensure the optimal one-inch separation from the grounding pad, mapping pad, EKG electrodes and corresponding defibrillation pad.
• Our polymer adhesive gels provide excellent contact, while offering uniform current distribution for effective defibrillation and pacing.
• Curaplex® defib pads are latex-free.
• Easy to read instructions, cautions and warnings located on packaging exterior.
• Packaging is color-coded. For example, if your hospital utilizes ZOLL packaging, it will always come with a yellow expiration label
• Our peel pouch and tear notch packaging means you have more ways to get to the pads if you’re wearing gloves
• An easy to follow instruction checklist is directly on release liners
• Unlike transparent release liners, these liners show up on the floor, so you won’t slip
• All Curaplex® pads have 510K for Physio Control, Zoll, Philips and HP
• Manufactured in the USA

• 2-1/4in diameter provides large adhesive area
• High chloride wet gel give fast, clear traces
• Can be defibrillated
• Hypoallergenic and Latex-free
• 24 hr Duration of use
• 0.42in Sensor (eyelet) diameter, 0.063in substrate thickness (adapter excluded), 3.5204in2 total product surface area, 0.3068 in2 Gel Area, 3.2136in2 adhesive area
• Electrical performance: (ANSI/AAMI EC12) 26Ohm ACZ impedance @10Hz, 0.39mV DC offset voltage, 0.06mV/sec SDR slope @30sec int, 21Ohm ACZ impedance repeat, 6µV COIIN, 6mV Bias current tolerance
• 18 Months shelf life