The FilterLine Set circuit is a one-piece design, ideal for quick application in emergency intubations. By combining a FilterLine EtCO2 circuit with a Microstream airway adapter, the FilterLine Set eliminates time consuming assembly and monitor setup. Compatible with LifePak® 12, LifePak® 15, Philips MP2, Phillips MRx and Zoll X Series.

• 2-port design - reduces clogging from moisture and secretions
• Airway adapter- captures accurate readings with small sample lines
• Built-in water trap with hydrophobic filter - prevents moisture from entering the monitor while maintaining the laminar flow and excellent waveform
• Universal airway adapter size for connections to both 15mm or 22mm endotracheal or tracheostomy tubes, ventilator circuits, closed suction systems and other devices

M1920A

• Disposable
• Compatible with LifePak® 12, LifePak® 15 and Philips MRx
• 2-port design - reduces clogging from moisture and secretions
• Airway adapter- captures accurate readings with small sample lines
• Built-in water trap with hydrophobic filter - prevents moisture from entering the monitor while maintaining the laminar flow and excellent waveform

• The Oridion Smart CapnoLine® Plus with O2 connector - adult/intermediate is designed for use with non-intubated patients who are either nose or mouth breathers.
• Adult/pediatric products are intended for use with ETT tube size >4.5mm.
• The adapter dead space is < 6.6 cc and the weight is 7.0g.

The Nasal and the NIV Line (non-invasive ventilation) CO2 sampling lines enable continuous non-intubated monitoring of etCO2 when nasal sampling is preferred. Built in water-trap with hydrophobic filter prevents moisture from entering the monitor while maintaining the laminar flow and excellent waveform.

• Ideal for use underneath oxygen, CPAP, bi-Level device or NPPV mask
• The filter design and small diameter of the circuit (1.0mm I.D. microbore tubing) improve accuracy and response time

**This is a custom kit not available to all customers.** Please see your dedicated Account Manager for information on how to build your own custom kit, or contact Customer Service at (800) 533-0523.

For ET tubes greater than 4.0mm...1/BXDM8000-0362

The O2/CO2 Nasal FilterLine breath CO2 sampling line enables continuous non-intubated monitoring of EtCO2 when nasal only sampling is preferred and oxygen delivery is required.

• Size: Pediatric
• Standard length is 200cm or 6.5ft.

Oral/Nasal CO2 w/ O2 Sidestream LoFlo Cannula. For use with the Zoll M-Series and CCT.....1/BX8000-0358

Smart CapnoLine EtCO2 circuits are ideal for nonintubated applications such as monitoring ventilatory status in asthma, bronchospasm, COPD, and procedural sedation–situations where oral ventilation can occur and cause inaccurate readings with nasal only lines. The "smart" design facilitates a crisp continuous waveform and accurate data for patients alternating between oral and nasal breathing. Smart CapnoLine monitors exhaled CO2 from oral and/or nasal ventilation.

• Size: Adult/Intermediate
• Tubing: 255cm

• Size: Infant/Neonate
• Non-intubated, long term duration with 6.5ft oxygen tubing.
• Nasal sampling may be preferred for use under a mask, when anatomical (facial) issues impede use of oral scoop, or when a patient is intolerant of oral scoop.
• Contains Nafion® or alternate moisture reduction technology to aid in humidity control.

• Offers precise and accurate sampling with improved performance for CO2 monitoring of non-intubated patients who are either nose or mouth breathers
• Patented Uni-Junction™ design assures oral and nasal sampling even at low tidal volumes, with minimal dilution of the CO2 waveform during O2 delivery
• Surface area of oral prong to provide effective breath capture even in the presence of shallow breathing
• Small diameter for the circuit (1.0mm ID microbore tubing) improve accuracy and response time
• Ideal under masks for accurate CO2 monitoring during DPAP, bi-Level device or NPVV and high flow rate O2 delivery therapy
• For use with most SideStream monitors