• High-performance, 3-electrode, pinless micro sensor with the fastest response time
• 0.1ppm H2S resolution and high-range1999ppm CO available
• Large, easy-to-read display for gas concentration or days remaining (user-configurable)
• Event logging of up to 10 events
• Data downloads and monitor configuration via the AutoRAE lite calibration station
• Intuitive, simple-to-operate user interface
• IP-67 water- and dust-resistant
• Loud, 95dB audible alarm, bright red flashing LEDs and internal vibration alarm
• Color-coded labels for gas type
• Extended operating temperature of -4 to 140°F with full T4 approval
• User-configurable bump/calibration reminders
• Rugged dust-tight and waterproof housing for harsh environments

• Immediate results - EMMA requires virtually no warm-up time, with full accuracy in 15sec to measure end-tidal carbon dioxide (EtCO2) and respiration rate (RR)
• Continuous capnogram allows for confirmation of endotracheal tube placement, enables clinicians to assess the depth and effectiveness of compressions and allows clinicians to recognize return of spontaneous circulation (ROSC)
• Small, portable capnograph - llightweight design fits in the palm of your hand for unmatched mobility and convenience during short-term EtCO2 monitoring of adult, pediatric and infant patients
• Flexible use at multiple points of care, including pre-hospital, emergency medicine, operating room, intensive care unit and long-term acute care
• Helps clinicians assess the effectiveness of CPR and guide ventilation, allowing them to make adjustments in the course of treatment, breath by breath
• Rugged, water-resistant design for reliable operation in challenging environments
• Easy to maintain - no routine calibration required
• Audible and visual alarm system for no adapter, clogged adapter, no breath (Apnea), low battery and adjustable high and low EtCO2 alarm

The Capnocheck® II Handheld Capnograph/Oximeter is a full featured, highly portable unit in your choice of configurations, delivering capnography only or capnography combined with oximetry. Ideally suited for use in and out of the hospital, its back-lit display assures easy viewing of waveforms, numeric values and on-screen trending data.

The battery-operated design with optional battery bypass offers the flexibility to accommodate both stationary and transport applications. Plus, an infrared link to an external printer provides quick, trouble-free downloading.

Features:

• Measures EtCO2, inspired CO2, respiration rate, SpO2 and heart rate
• Displays waveforms, trends, and numeric values
• Adjustable alarm limits
• Visual and audible alarms
• Sidestream technology accommodates intubated and non-intubated patients
• Dimensions: 2.9in L x 4.4in W x 5in H

The Drager Pac® 5500 is ideal for fast and accurate personal monitoring and detection of carbon monoxide.

• Tailor-Made for Tough Industrial Assignments
  Dräger has specifically designed the Pac® 5500 to meet tough industrial requirements such as those of IP68. The shock-proof rubber casing offers reliable protection against external influences and corrosive chemicals.
• Outstanding Display Technology
  The large LCD display is user-friendly and shows both the gas concentration and unit of measurement. Users can also choose to only view concentration when the configured alarm threshold is exceeded. Additional background lighting ensures that the display is always easy-to-read.
• Latest Sensor Technology featuring Low Operating Costs
  The Dräger Pac 5500 is equipped with the latest Dräger XXS sensor technology that offers an innovative and extremely high performance with reaction times of just ten seconds. The life cycle of five to eight years is also well above average and provides lower operating costs for users.
• Event Logger for 60 Events
  The Dräger Pac 5500 can store up to 60 events, along with their dates and times. Events such as activation and deactivation, gas and battery alarms, error modes and configuration adjustments can be loaded and analyzed on a PC via the infrared interface.
• Safety in any Situation
  The device’s sensor has been specially positioned to allow gas access at both the top and front. Therefore, even when the unit is placed in a pocket or the gas entry has been accidentally covered it is still possible to take a reliable reading.

The LifeSense® Capnograph/Pulse Oximeter is ideal for continuous monitoring in acute care environments. Equipped with Nonin® PureSAT® SpO2 and MedAir™ EtCO2 technologies, LifeSense is a proven performer for ET tube placement verifications, detecting breathing irregularities, gauging the efficacy of CPR and procedural sedation monitoring. Its sidestream design allows use with intubated and non-intubated patients.Features

• Fast, first breath detection of respiratory rate and end-tidal CO2 (EtCO2)
• Proven Nonin SpO2 technology
• Highly visible, touchscreen display
• Numerical SpO2, pulse rate, EtCO2 and respiratory rate
• Capnograph and pulse plethysmograph
• Data output via RS232 port
• Meets rigorous ISO requirements for air and ground EMS transport
• Dimesions: 5.3in H x 7.9in W x 2in D

• Accurate measurement technology - Accuracy 0 to 38mmHg ±2mmHg, 39 to 99mmHg ±5% of Reading
• IR-based technology that is CO2 specific
• Unaffected by the presence of other inhaled gases
• Clear, crisp, waveforms and accurate respiratory rates
• Fast on power-up; fully accurate at first reading
• Low sampling flow rate of 50mL/min, required for neonates
• Versatile design for fast, simple set up and use - A single, integrated sensor is engineered for use with all patient populations in all clinical environments
• Offers the option to switch between patient types without re-zeroing or re-calibration
• Rugged and cost effective - no expensive external sensor or cable to damage
• Broad CO2 sampling line portfolio - A wide array of sampling lines to meet clinical needs - longer-term monitoring, high humidity environments, adult, pediatric and neonate patient types, both intubated and non-intubated, with or without supplemental oxygen delivery
• A complete set of interface and connectivity options - Nurse call interface provides remote alarm connectivity to existing call system
• Bernoulli MSM wireless technology platform enables data transfer to central monitoring systems
• Interfaces with Philips (via VueLink) and spacelabs (via Flexport®*) monitoring systems
• FilterLine® CO2 sampling line solutions are available for all patients, whether intubated or non-intubated, in any clinical setting
• The unique Microstream™ patient interfaces reliably sample oral and nasal breathing, even in the presence of supplemental O2

The Capnocheck® II Handheld Capnograph/Oximeter is a full featured, highly portable unit delivering capnography combined with oximetry. Ideally suited for use in and out of the hospital, its back-lit display assures easy viewing of waveforms, numeric values and on-screen trending data.

The battery-operated design with optional battery bypass offers the flexibility to accommodate both stationary and transport applications. Plus, an infrared link to an external printer provides quick, trouble-free downloading.

Features:

• Measures EtCO2, inspired CO2, respiration rate, SpO2 and heart rate
• Displays waveforms, trends, and numeric values
• Adjustable alarm limits
• Visual and audible alarms
• Sidestream technology accommodates intubated and non-intubated patients
• Dimensions: 2.9in L x 4.4in W x 5in H

• Immediate results - minimal warm-up time, with end-tidal carbon dioxide (EtCO2) and respiration rate (RR) measurements displayed in 15sec
• Small, portable capnometer - llightweight design fits in the palm of your hand for mobility and convenience during short-term EtCO2 monitoring of adult, pediatric and infant patients
• Designed to fit easily onto a breathing circuit - flexible use at multiple points of care including pre-hospital, emergency medicine, operating room, intensive care unit and long-term acute care
• Rugged design for reliable operation in challenging environments
• Easy to maintain - no routine calibration required
• Audible and visual alarm system for no breath detected, no adapter, check adapter and adjustable high and low EtCO2 alarm
• Long battery life - up to 12hr of normal use with two standard AAA lithium batteries

• For external charging and to quickly replace batteries in mobile environments or when a wall plug is not convenient