Defib & AED Accessories

Battery charger and Quik-Pak pacing/defibrillation/ECG electrodes.

Includes:

• 2 sets electrodes
• 1 battery charger
• Replacement instructions
• Discharger for safe disposal of used Charge-Pak™.
• For use with LifePak®™ CR plus and LifePak®™ express.

11403-000001

The D.360 swivel mount is for the Zoll X and ProPaq MD defibrillators. 

Features:

• 20.G Tested in all directions
• Quick-release provisions
• Allows rapid install and removall of MD/X from airframe or EMS vehicle
• Unique design allows the defibrillator to be swiveled 360 degrees 
• Easily accommodates the Zoll pouch systems
• Multiple D360 swivel base, allows for multiple locations with single MD/X
• Ideal for placement in tight spaces such as under cabinets

Dimensions: 7.625 inch x 6 inch x 1.5 inch

Weight: 3 lbs.

The Ferno M-200 Defibrillator Mount Kit is designed to secure the Physio Control Life Pak 12 and 15, with or without a bag.

Features:

• Each Ferno Defibrillator Mount is easily installed onto a countertop or bench
• A quick release mechanism allows easy locking and unlocking of a defibrillator for graband-go convenience on scene
• Each Ferno Defibrillator Mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Ferno Defibrillator Mounts accommodate the defibrillator and soft storage accessories

Specifications:

• Depth: 12 in 30 cm
• Height: 15.25 in 38 cm
• Width: 12.5 in 32 cm

NCE mounts provide the maximum protection for your Zoll defibrillator, minimizing the risk of costly repairs due to device impacts or falls during transport. More importantly, these mounts will protect your EMT’s from flying defibrillators in the event of a sudden stop, accident or roll-over.

• One hand quick release
• 360° Swivel, easy positioning and viewing
• Easy immediate access
• Easily mounts to countertop
• Baked white enamel for durability

DIX9000

The D.360 Swivel Base can be purchased separately and should be permanently installed to an appropriate surface with 4 (3/16 x 2in) attachment fasteners furnished with the Swivel Base. To secure the monitor (with adapter) to the Swivel Base, slide the bottom of the disk into the Swivel Base Receiver - which will automatically lock the monitor. Rotate the monitor by pushing the Swivel Release Button, the monitor can now be positioned as needed. Remove the monitor by pushing the Swivel Release button.

This item is only the base. Mounting plates are sold seperately.

FWFA868A100

The Propaq MD/X D.360 Swivel Mount features: 

• 2 Stage system using both the MD/X adapter and swivel base
  • Both these items are sold separately
• Allowing multiple locations to be employed with a single Propaq monitor
• Adaptor disk slides into the swivel base and allows rotation of the monitor
• Quick-release allows the monitor to be removed when needed
• CNC machined from aircraft grade aluminum

• For 804 gauge only

ADC804C

A precision-crafted instrument of hardened steel for accurate measurement of tracing intervals. Point protector has built-in 40mm metric scale. Measures 4-3/4in.ADC395

• External manikin adapter
• Attached over the skin of manikin
• For use with all CPR/AED manikins.

M5089A

As a single-patient-use ear sensor that is placed securely in the cavum conchae (the deep hollow near the ear canal opening), the E1 allows clinicians to combine performance with a reliable alternative monitoring site while minimizing cross-contamination.

• Avoids cross-contamination risks
• Faster detection of desaturation/resaturation
• Alternate monitoring site with easy access during surgery, resuscitation, in patients with finger deformities or when digit access is not possible
• Offers reliable measurements during extremely low perfusion allows for hands-free monitoring
• Ear site may offer advantages for pleth variability (PVI®) monitoring to help clinicians assess fluid responsiveness

Designed to measure electrocardiogram waveforms. Plastic protective cover features a molded ruler to aid in measurements. Made in Germany.

Display screen cover for the HeartStart MRx.

The Ferno P-300 Defibrillator Mount Kit is designed to secure the Philips HeartStart MRx defibrillator.

Features:

• A quick release mechanism allows easy locking and unlocking of a defibrillator for grab-and-go convenience on scene
• Each Ferno defibrillator mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Ferno defibrillator mounts are easily installed onto a countertop or bench
• Ferno defibrillator mounts accommodate the defibrillator and soft storage accessories

• Used to perform therapy cable performance checks.
• Connects to the Quik-Combo therapy cable on the defibrillator.
• English only

• Universal base charger works with interchangeable trays to charge
• LifePak®™ 12 and 15 Li-ion batteries

 

11141-000115

• For the LIFEPAK 15 monitor/defibrillator

• Test load for use with M3508A pad cable.
• Used to test hands-free cables with plug connector.

M3725A

Unsecured medical equipment stored in ambulances, helicopters, other EMS vehicles, and crash carts have the potential to become a damaging object, as the vehicle makes sudden turns, stops and starts. The result can be damage or destruction of the costly equipment and/or a potential injury to the patient and vulnerable attendants. To spare the expense of costly repair or replacement of equipment, and medical care and possible legal redress for injury, consider outfitting your EMS vehicles or crash cart with a defibrillator holder.

• 360° Swivel, easy positioning and viewing

DIH7000

• Use with HeartStart MRx
• Color: green

This item is currently on long term backorder.

989803163291

The Physio-Control AC power supply connects to the bottom of the LifePak® 12.

• Stores 8 hours of ECG patient event data, including 8 hours of voice recording (if desired) for download and retrospective review

989803150061

• Ideal for additional accessory storage
• For use with LifePak 12

 

• AC Power Module for HeartStart® MRx

M3539A-REF

Unsecured medical equipment stored in ambulances, helicopters, other EMS vehicles, and crash carts have the potential to become a damaging object, as the vehicle makes sudden turns, stops and starts. The result can be damage or destruction of the costly equipment and/or a potential injury to the patient and vulnerable attendants. To spare the expense of costly repair or replacement of equipment, and medical care and possible legal redress for injury, consider outfitting your EMS vehicles or crash cart with a Defibrillator Holder.

Replacement AC Power Adapter/Charger, For the Propaq MD

Power cord is sold separately.

• AC Power Adapter for LIFEPAK 15

The Ferno M-201 Defibrillator Mount Kit is designed to secure the Physio Control Lifepak 12 with AC adapter.

Features:

• A quick release mechanism allows easy locking and unlocking of a defibrillator for grab-and-go convenience on scene
• Each Ferno defibrillator mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Each Ferno defibrillator mount is easily installed onto a countertop or bench
• Ferno defibrillator mounts accommodate the defibrillator and soft storage accessories

Specifications:
Depth: 12 in 30 cm
Height: 17.75 in 45 cm
Width: 15.75 in 39 cm

The Zoll base power charger 4 x 4 charges and reconditions batteries in all 4 bays. This battery station charges all Zoll Medical external batteries for Zoll defibrillators and AEDs, including models PD 1400, PD 1600, PD 2000, M Series, E Series and select AED pro models.

• Automatically tests and recharges a battery rapidly in 8hr or less
• Uses visual and audible indicators to alert users to batteries with insufficient capacity, incomplete charge and detected faults to ensure safe and reliable patient us
• Is equipped with automated testing to save technician time and cost by eliminating manual procedures and preventing battery problems before they occur
• Includes Zoll 4 bay station charger and A/C power cord

The Ferno Z-103 Defibrillator Mount Kit is designed to secure the Zoll E Series defibrillators with a soft or hard case.

Features:

• A quick release mechanism allows easy locking and unlocking of a defibrillator for grab-and-go convenience on scene
• Each Ferno defibrillator mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Each Ferno defibrillator mount is easily installed onto a countertop or bench
• Ferno defibrillator mounts accommodate the defibrillator and soft storage accessories

Specifications:
Depth:12.25 in 31 cm
Height: 3.25 in 8 cm
Width: 12.25 in 31 cm

No additional details are available at this time.

The FR3 infant/child key has a distinctive pink, teddy-bear shaped head and a cylindrical post that is inserted into the FR3 to treat a sudden cardiac arrest victim who is under 55lb (25kg) or 8 years old. The infant/child key is supplied with a tether that can be threaded through the key and then inserted through a slot in the top of the infant/child key compartment in the upper portion of your FR3 system case, if desired. The tether is not required for using the key. With the Key in place, the FR3 automatically decreases the defibrillation therapy delivered from the adult dose to a level more appropriate for these patients and implements the configured infant/child CPR protocols.989803150031

• LifePak Adapter Tray for REDI-CHARGE Charger and Li-ion Battery.

• Includes right angle cable (AC power cord not included)

 

Download case data: Download your patient case data from the AED or monitor and forward to your medical director, colleague, or patient's physician for analysis, erase it from the defibrillator, and synchronize case times and defibrillator clock with your PC.

Manual or automatic: Heart Start® data messenger can process cases under your control in "manual mode" or simplify your responders’ job by processing cases automatically in the background, according to pre-configured preferences – no need to interact with software.

Batch file: Heart Start® MRx monitor/defibrillator users can automatically download multiple patient summaries at once via LAN and forward them all in one batch to either an event review pro database or electronic patient care reporting system (ePCR).

Real-time consultation: Heart Start® MRx users can forward 12-lead ECGs and vital sign data from the field to either the Heart Start® Tel.

861451-A01

Assist-a-lead will prevent EKG wires from becoming a tangled mess. It takes just seconds to apply and allows for rapid application of the electrodes. Assist-a-Lead slides down the EKG leads and keeps them separated. This device saves time with each use. You will no longer struggle with the tangle of wires before applying electrodes on your patient.

• Length: 3 feet
• For OxiClip™ sensor