EtCO2 Sampling Lines

• Designed for single patient use
• Latex free
• Compatible in MRI environment
• Adult/Pediatric products are intended for use with ETT tube size > 4.5 mm
• Integrated, single-piece airway gas sampling lines comprised of the patient cannula or airway adapter, water trap and a sterilizing grade filter that is designed to reduce the risk of biohazard contamination of the patient monitor
• Uni-junction™ technology is designed to ensure proper sampling for patients who alternate between oral and nasal breathing
• Oral Scoop design has wide surface area to provide breath capture even in the presence of shallow breathing
• Oxygen flows from holes in front of nasal prongs and improves humidity of O2
• Delivers O2 flow up to 5 L/min and can deliver above 5 L/min using external O2 delivery, e.g. through a mask, without affecting CO2 measurement values
• Broad portfolio of sampling lines available for various clinical situations
• One size fits adolescents through adults
• The adapter dead space is < 6.6 cc and the weight is 7.0 g.
• Long FilterLine® length: 400 cm/13 ft.

• Disposable
• Compatible with LifePak® 12, LifePak® 15 and Philips MRx
• 2-port design - reduces clogging from moisture and secretions
• Airway adapter- captures accurate readings with small sample lines
• Built-in water trap with hydrophobic filter - prevents moisture from entering the monitor while maintaining the laminar flow and excellent waveform

• The Oridion Smart CapnoLine® Plus with O2 connector - adult/intermediate is designed for use with non-intubated patients who are either nose or mouth breathers.
• Adult/pediatric products are intended for use with ETT tube size >4.5mm.
• The adapter dead space is < 6.6 cc and the weight is 7.0g.

• Ideal for use underneath oxygen, CPAP, bi-Level device or NPPV mask
• The filter design and small diameter of the circuit (1.0mm I.D. microbore tubing) improve accuracy and response time

The O2/CO2 Nasal FilterLine breath CO2 sampling line enables continuous non-intubated monitoring of EtCO2 when nasal only sampling is preferred and oxygen delivery is required.

• Size: Pediatric
• Standard length is 200cm or 6.5ft.

Smart CapnoLine EtCO2 circuits are ideal for nonintubated applications such as monitoring ventilatory status in asthma, bronchospasm, COPD, and procedural sedation–situations where oral ventilation can occur and cause inaccurate readings with nasal only lines. The "smart" design facilitates a crisp continuous waveform and accurate data for patients alternating between oral and nasal breathing. Smart CapnoLine monitors exhaled CO2 from oral and/or nasal ventilation.

• Size: Adult/Intermediate
• Tubing: 255cm

• Size: Infant/Neonate
• Non-intubated, long term duration with 6.5ft oxygen tubing.
• Nasal sampling may be preferred for use under a mask, when anatomical (facial) issues impede use of oral scoop, or when a patient is intolerant of oral scoop.
• Contains Nafion® or alternate moisture reduction technology to aid in humidity control.

• Offers precise and accurate sampling with improved performance for CO2 monitoring of non-intubated patients who are either nose or mouth breathers
• Patented Uni-Junction™ design assures oral and nasal sampling even at low tidal volumes, with minimal dilution of the CO2 waveform during O2 delivery
• Surface area of oral prong to provide effective breath capture even in the presence of shallow breathing
• Small diameter for the circuit (1.0mm ID microbore tubing) improve accuracy and response time
• Ideal under masks for accurate CO2 monitoring during DPAP, bi-Level device or NPVV and high flow rate O2 delivery therapy
• For use with most SideStream monitors

• Disposable
• Conventional water traps introduced problems when used to remove excessive moisture:
  • Air mixing which resulted in lower EtCO2 readings
  • Low Volume which interrupted patient monitoring
• Nonin's flow-thru design, the moisture water trap eliminated air mixing which gives accurate EtCO2 monitoring 
• High capacity moisture trap that allows uninterrupted patient monitoring
• With filter
• For LifeSense® and RespSense™ Capnograph

• For intubated patients

• For use with MP2
• Size: adult/pediatric
• Use with endotracheal tube size greater than 4.0mm
• <5cc deadspace
• Disposable

Patient Attachment Kit:

• For BCI Capnocheck II

• 100 inch tube
• Non-intubated gas capnography
• Gas capnography with oxygen
• Monitoring CO2/O2 for up to 12hr

Gas Manifold Filters:

• For Use with:
  • Capnocheck® Plus
  • Capnocheck® Sleep
  • Advisor®

• For use with Welch Allyn ProPaq and Atlas monitors
• Patented Uni-Junction™ design - assures sampling from either the oral or nasal breathing source
• O2 delivery system - provides comfortable delivery up to 5 lpm without dilution of CO2 sample; delivery via small pin-holes
• Increased surface area of oral sampling prong - provides greater accuracy in the presence of low tidal volume

• Size: Adult/Pediatric
• For use with Welch Allyn ProPaq® and Atlas™ monitors

• Size: Adult/Pediatric
• For 15mm or 22mm connection
• For use with any Non-Microstream® enabled monitor

• Length: 13 feet
• The patented family of FilterLine™ etCO2 sampling lines is designed for use with Microstream®-enabled capnography monitors
• Available for neonates through adults

• For Patients with ET Tubes 5mm I.D. or Smaller
• Low dead space
• Single patient use

• For use with MP2
• Size: infant/neonatal
• Use with endotracheal tube size less than or equal to 4.0mm
• <5cc deadspace
• Disposable

CO2 Sample Line features:

• for the Capnocheck II
• Length: 8ft

• Single patient use
• Adult/pediatric
• For mainstream CO2 option

• For use with Welch Allyn ProPaq and Atlas monitors

This item has been discontinued. At this time there is no suggested replacement for this item.

• Size: Pediatric
• For use with Welch Allyn ProPaq and Atlas monitors.