Ventilators

Standard Dual-Axis Swivel Adapter with Angled Termination 15mm.

• Non-Sterile

The AHP300 is a new broad-featured transport ventilator designed to meet the specific needs of modern EMS response. It features Pressure or Volume Control, CPAP / Bi-Level Support, A/C or SIMV, and full FiO2 blending capability. Its single panel control interface is easy to navigate, easy to clean, and rugged. It also features quick start programmable presets, O2 Conserve, a 7.5 hour battery life, and carries a low cost of ownership.

Dimensions: 13.8in H x 13.3in W x 5.3in D

Broad Featured Capability:
Invasive and non-invasive support for infant (5 kg and up) to adult patients, with a flexible array of ventilation options including Pressure Control/Volume Control ventilation, SIMV/ Assist Control spontaneous breath support, and stand-alone CPAP/BiLevel support.

Enhanced Ease of Use:
The AHP300 offers value-added features for intra-hospital and inter-hospital transport.
Quick Start Ventilation – Featuring programmable presets, the AHP300 allows trained caregivers to rapidly recall up to 5 saved ventilation protocols.
Long Battery Life – Up to 7.5 hours on internal battery, with auxiliary battery capability for up to 21 hours of battery life.
Oxygen Conserve Mode – Allows the use of low pressure sources (oxygen concentrator, liquid oxygen, etc.) to extend available oxygen.
Multi-Environment Capability:

For everyday transport or evacuation from extreme environments, the AHP300 has you covered. It features rugged shock and vibration resistance, and IPX22 water resistance.

Low Cost of Ownership:
Simple preventive maintenance schedule along with low-cost battery and repair parts result in significant savings and lower cost of ownership than comparative broad- featured ventilators.

The eSeries circuit features:

• Fits all models e500, e600, e700
• This circuit has a quantity of 10 per case
• The circuit is designed to support the live monitoring and must be used on all 3 models
• Single-use

A substitution cannot be made.

• Simplify delivery of aerosolized medication to ventilator patients
• Reduce risk of circuit pressure loss
• Provide a closed system to minimize risk of contaminatio

Hyperinflation Systems feature:

• Systems equipped with a stay-put dial to enable clinician to achieve targeted static pressure
• Patient port swivel allows clinician to easily move around patient while maintaining proper resuscitation
• Non-inflatable face masks can be specified
• Available with Ventlab’s signature pressure manometer and components to create a custom system
• Pleated breathing bag sizes available: 1/2, 1 and 2 liter
• Breathing bag
• Single Use
• Size available: Small infant and No mask

The Ballard® Trach Care™ closed suction system is designed to safely suction neonatal and pediatric patients on mechanical ventilation, while providing protection for both the patient and the caregiver.

Our neonatal and pediatric Trach Care™ closed suction system include:

• Size: 8 French
• Dimensions: 2.6mm OD, 35.5cm
• Number and color coded graduations for controlled depth suctioning
• Elbow and "Y" configurations
• Tactile sleeve for catheter advancement
• Single patient use
• Gamma sterilized

• Designed to securely wrap and protect the AHP300 transport ventilator
• Secures to the ventilator with 1/2in Velcro straps
• Lined with 1/4in/2lb protective foam for added protection
• Exterior fabric is commercial grade polyester
• PVC back coating is 100% waterproof

• Kit contains handle, swivel hook assembly and all mounting hardware
• 1-1/2in Clearance on swivel hooks will accommodate all standard cot rails
• PVC-coated hooks and nylon bumpers prevent scratching of the cot

The LSP AutoVent series integrates field experience and engineering excellence, producing a lightweight, transportable automatic ventilator. Both the AutoVent 2000 and 3000 meet the American Heart Association standards for automatic ventilators. Designed for patients over 44 pounds, both units utilize state-of-the-art pneumatics to assure reliable, time-cycled, constant flow capabilities driven by a minimum of source gas. The additional capability of adjustable inspiratory time makes the AutoVent 3000 ideal for institutional applications. Independent controls for rate and tidal volume on the AV2000, and the additional inspiratory time settings on the AV3000, can be adjusted quickly and monitored at a glance. The AutoVents may be used with resuscitation masks or endotracheal and tracheostomy tubes.

Manufacturer Brochure

• Use between wye and endotracheal tube adapter
• Directs medication mainstream for ventilator patients
• Arrows clearly mark direction of airflow
• 6in of tubing can be added to create a chamber when applicable
• Accepts plastic or metal tipped metered dose inhaler canisters
• Polystyrene butadiene
• Thermoplastic rubber cap

• Designed for use with manual resuscitator/ventilator
• Connects to exhalation port of manual resuscitator
• Large print on scale for easy viewing
• Latex Free
• Single Use
• Pressure range: 5-20 cm H2O
• Size Range: 19mm and 30mm

• Standard 15mm connector
• Latex-free silicone bag with re-usable flaps
• Autoclavable
• Resistance: 17.7 cm H2O /0.5L /sec.
• Compliance: 26 ml / cmH2O at 600ml tidal volume

AMSure® Respiratory Adapters features:

• Non-Sterile
• Latex Free, DEHP Free and BPA Free
• Disposable
• Multi-adapter
• Standard 15 mm I.D. and 22 mm I.D. Connections

The EPV200 with Assist-Control is a portable mechanical ventilator designed to provide ventilation for intubated or non-intubated patients.

This gas-powered electronically-controlled vent is equipped with independent inspiratory time, tidal volume and BPM controls. It also features a built-in digital manometer and a full array of pre-set visual and audible safety alarms. The Assist-Control fuction triggers at less than -2 cm H2O to accommodate spontaneous breathing.

• Dimensions: 3.5in x 7in x 9.3in
• Assist-Control operation accommodates conscious or sem-conscious patients via invasive or non-invasive ventilations
• Simple control interface enables treatment by a broad range of caregivers during medical surge or routine transport
• Lightweight durable construction is ideal for use in transport ventilation or stockpiling
• Weather-resistant and will run up to 48 hours on two D cell batteries
• The EPV200 portable ventilator is a gas powered electronically controlled mechanical ventilator, designed to provide emergency respiratory support by means of a face mask or an endotracheal tube inserted into a patient’s airway
• The EPV200 is a volume controlled ventilator that delivers time cycled constant flow breaths with assist-control function for spontaneous breathing
• The EPV200 is an all-weather ventilator suitable for use at the scene of a medical incident, as well as in pre-hospital, intra-hospital, and inter-hospital transport
• The EPV200 has been designed to withstand direct exposure to rain, up to 100G shock and vibration, and drops of up to 4ft
• The EPV200 ventilator is intended for use on patients weighing greater than 20kg, or 44lb

• Single patient use
• 15mm OD equipment connection x 15mm ID patient connection
• Comes with a dual use suctioning and fiber-optic cap
• Cap is easily changed allowing use of fiber-optic or suctioning equipment
• Smooth surfaces are gentle to bronchoscopy equipment
• Polycarbonate

The Venti.Plus Test Lung was designed for fast and easy ventilator circuit testing prior to clinical use. It comes complete with a latex-free silicone bag that simulates either an adult lung (1 liter models), or an infant lung (0.5 liter models). Both models include a convenient turn and lock design that allow for easy removal of the bag for cleaning and decontamination. Every lung is calibrated for accuracy and validated for resistance and compliance within the application range. The Venti.Plus™ also makes for a great training and demonstration device!

• Calibrated for high accuracy
• ISO compliant 15 mm connection port
• Lightweight, easy to use and portable1 liter or 0.5 liter models available
• Convenient turn and lock design for easy cleaning
• 12 month warranty

• Dimensions: 12in W x 5.5in D x 5in H
• Will securely hold a wrapped 6ft J circuit (L599-600) and oxygen hose
• Secures to the ventilator D rings with metal clasps and included 1.5in wide hook-and-loop strip that attaches to the top of the ventilator
• Integrated 1/4-sheet protocol pocket on the lid
• Exterior fabric is commercial grade polyester
• PVC back coating is 100% waterproof
• 1in Hook-and-loop lid closure

• Reusable
• Designed to run directly from a source with pressure that does not exceed 50 psi
• Llightweight, portable and durable
• Specially designed for use with our ACU 1060.1 and ACU 1060.2 transtracheal catheters
• A necessity for emergency rooms, crash carts and ambulance
• Includes on/off valve, reusable six foot high pressure tubing, single patient use four foot small bore tubing

Adult, Infant and Pediatric test lungs. 64ml, 500ml and 1 liter options. Disposable.

O-Two Medical Technologies provides a disposable adjustable 5 to 20cm H2O PEEP Valve to fit your choice of diverter. PEEP Valve is used to keep the lungs open; maintains pressure to keep the alveolar open.

• Exhalation valve assembly for demand valve on Autovent.

• Lightweight air/oxygen entrainment mixer
• DISS fitting

Bag features:

• A thumb break instant release handle
• Stainless steel frame
• Vinyl coated hooks allow the bag to hang from rails without slipping
• Comes with a heavy duty swivel shoulder strap
• Designed for use with the paraPAC ventilator

• Wall mount system has been tested to IEC 60068-2-27 at 20Gs
• The combined weight of the AHP300 ventilator and complete wall mount system is 23lb
• Includes: One back plate made from 1/8in thick aluminum with holes sized for a # 10 threaded fastener, and comes equipped with a quick release handle
• One nickel plated carrying handle
• One PVC coated swivel hook assembly
• Two lower mounting retainers

The paraPAC plus™ gives you the versatility to deliver mechanical ventilation, demand and free flow oxygen therapy and CPAP from one compact, lightweight unit. 

Features:

• Integrated PEEP control, PEEP range 0-20 cm H2O
• Built in oxygen therapy facility, Oxygen flow range 0-35L/min
• DEMAND system, allowing the patient to breathe with the ventilator
• Lightweight and rugged
• Manual breath with Pneupac® patented volume limiter
• Fits to existing Pneupac® brackets
• Luminescent manometer
• Display of inspiratory and expiratory pressure
• Hyperinflation accessory for neonatal ventilation
• Dimensions: 9.25in x 6.5in x 3.7in

• Gray replacement O-ring for the HT70 and HT70 Plus ventilators

• Patented mode of operation
• Optional PEEP facility
• MRI compatible up to 3 Tesla
• Pneumatically powered
• Lightweight and durable

• Principle of Operation: Time/Volume Cycled
• User Type: Adults, Children/Infants > 11 lbs (5 kg)
• Ventilation Mode: Demand – SMMV/Demand
• Tidal Volume: 1300 - 70 ml
Frequency: 8 - 40 b/min (12 b/min at click stop)
• Flow Range: 6 - 60 L/min
• I:E Ratio: 1:3 at 8 b/min to 1:1.3 at 40 b/min
• Pressure Relief

The AutoVent 4000 is the next generation of transport ventilators. It has been designed to meet your need for reliable transport ventilation and CPAP in a wide range of situations, from basic life support to more sophisticated air and ground transport. This rugged ventilator features the lightest weight in its class and runs off pneumatic power. It has independent settings for breaths-per-minute, inspiratory time and tidal volume, providing the flexibility needed for optimum patient care. Available in four models. Models L760 and L761 measure: 2.9 inch x 9.6 inch x 6-1/2 inch. Models L762 and L763 measure: 2.9 inch x 9.6 inch x 8.0 inch

Features

• Operation with HP Oxygen
• Adjustable Pressure Relief w/Alarm
• Adjustable Tidal Volume
• Low Source Gas Pressure Alarm
• Adjustable BPM
• Manual Breath Button
• Child and Adult Settings
• Color-Coded Labels & Gauge for Initial Settings
• Internal Demand Valve
• Air Mix Mode (L761 & L762 only)
• Manometer Readout
• Electronic Alarm Package (L762 & L763 only)
• Anti-Breath Stacking

Manufacturer Brochure