A stair chair truly designed with the transporter in mind, the Curaplex Stair Chair.

Features:

• (4) 5-inch stationary wheels for better ergonomic mobility with back-wheel locks to enhance ease of use, and safety
• Made of high grade aluminum
• The chair chassis extrudes squarely to strengthen the core and support irregular weight disbursement by offering more PSI on each connection joint
• Two-position telescoping front handles for effective maneuvering in tight spaces
• Lifting handles were built with strong brackets and thick connection bolts
• Covered with vinyl-coated nylon
  • Stain Resistant
  • Fluid Resistant
  • Easy to clean

Includes 2 quick-release patient restraints.
Load Capacity: 350 lbs
Weight: 19 lbs
Height: 36inch
Width: 21inch
Depth: 28inch
Folded: 8inch

The Ferno EZ-Glide chair can be used as a stair chair, evacuation chair, and transport chair. Two rear tracks contact the lip of stairs, allowing them to glide over the edge of each step and eliminate the need to lift the chair and patient. This chair features an all-metal frame construction, which allows bariatric patient transport. The chair also features two 4 inch front swivel wheels and two 6 inch rear wheels with locks, a 5-position rear lift bar (from 37.5 inch to 63.5 inch), and 5-position front telescoping handles (from 5.4 inch to 19 inch). Includes a vinyl cover. Available in different colors.

The EZ-Glide® Evacuation Stair Chair glides patient loads up to 500 lbs down stairs without carrying or lifting. The one inch track-to-ground clearance and front swivel-wheels provide maneuverability over carpet and in confined spaces such as stair landings.

Features:
 

• 500 lb weight capacity accommodates large patients
• Positive locking hinge mechanism ensures chair is locked in place whether deployed for use or folded for carrying and storage
• Smooth 4 inch front swivel wheels and extra tall 6 inch rear wheels do not collect debris and provide maneuverability in confined spaces such as stair landings
• All metal frame construction
• Seat area available in two snap-on ABS plastic panels
• Extending foot-rest and lower track angle increase patient sense of security
• Five position front telescoping handles (from 5.4 inch to 19 inch)
• Five position rear lift bar (from 37.5 inch to 63.5 inch)

Please contact Customer Service to order this item at 800.533.0523

The EZ Glide Locking Rear Lift Handles provide additional gripping points for the head-end operator when lifting the chair or maneuvering over surfaces.

Compatible with the Ferno 59T EZ Glide evacuation stair chair.

The EZ-Glide with Powertraxx® provides maximum safety when going up and down stairs using an electronically controlled motor and direct drive transmission with chair tracks. The tracks and motor carry the patient load, not the operator. Enjoy maximum performance on every call with intelligent power system that runs up to 20 flights of stairs per charge. The chair's easy operation when climbing or descending stairs with intuitive, easy-to-use paddle-style controls keep you in control.

Features:

• One inch track-to-ground clearance provides smooth rolling over carpet and rough surfaces
• Smooth 4" front swivel wheels and extra tall 6" rear wheels do not collect debris and provide maneuverability in confined spaces such as stair landings
• Positive locking hinge mechanism ensures chair is locked in place whether deployed for use or folded for carrying and storage
• Wireless motor controls work in any handle position
• All metal frame construction provides durability and long life
• Large patient seating surface with removable ABS plastic seat panels
• Extending foot-rest and lower track angle increase patient sense of security
• Five position lift bar and handles reduce the strain

Benefits:

• Maximum safety when going up and down stairs using an electronically controlled motor and direct drive transmission with chair tracks. The tracks and motor carry the patient load, not the operator.
• Maximum performance on every call with intelligent power system that can carry up to 500 lb
• Easy operation when climbing or descending stairs with intuitive, easy-to-use paddle-style controls
• Electronic brake locks tracks during stops on ascent or descent
• Built-in electronic speed control limits track speed during descent to a safe, manageable level
• Includes a rechargeable Milwaukee lithium-ion battery that is easy to remove and is commercially available

Specifications:

Height: 37.5in (95cm)
Weight: 56.5lbs (25.6kg)
Load Limit: 500lbs (227kg)
Width: 20.5in (52cm)

Please contact Customer Service at 800.533.0523 to order this item.

The 28Z PROFlexx® Chair Cot provides maximum versatility in confining environments. The 28Z transforms from a cot to a chair so you can easily maneuver through tight hallways, narrow staircases and small elevators, without transferring the patient.

One-hand release mechanism changes cot into one of three locked positions: chair/intermediate/cot.

All-metal frame construction provides strength, long service life and exceptional performance with heavy patients.

Includes

• Mattress
• Restraints
• Tray

Specifications

• Weight: 69 lbs
• Load Limit: 700 lbs
• Width: 25 inch
• Depth: 48 inch
• Load Height: 27 inch

Please contact Customer Service to order this item at 800.533.0523

Designed to be stored in small places, the Model 42 Stair Chair functions well in confined areas such as narrow hallways and multiple-landing stairways. Two 4inch rear stationary wheels and two 2inch low-profile front guide wheels allow the Model 42 to roll over most carpeted or hard surfaces. Four lifting handles with nonslip handgrips enable EMTs to move the patient safely and easily. Soft vinyl-coated cover is simple and easy to clean, resists blood, stains and bodily fluids. Locking safety latch maintains Model 42 in the chair position during use. Safety latch is manually released when the chair is folded for storage. Two 7ft quick release patient restraints securely hold the patient.

The Model 40 is easy to manuever and gets you in and out of cramped quarters. Two 5 inch stationary rear wheels roll over most surfaces. Telescoping, two-position front handles allow the foot-end EMT to manuever the patient without interfering with the patient's feet.
Standard features:

• Two 5 inch (127mm) stationary rear wheels
• Telescoping front handles with 2 positions
• Vinyl-coated nylon cover resists stains and bodily fluids
• Three 7 feet (2134mm) quick-release patient restraints
• Easily mounted on walls
• Folding rear carrying handles (non-locking)
• Lock bar when deployed
• Folding frame / compact storage position
• All metal frame construction
• Rubber grips
• Weight: 19 lbs; Load capacity: 350 lbs

The EZ-Glide Stair Chair with PowerTraxx™ powers patient loads up to 500 lbs up and down stairs without carrying or lifting. Ferno's one inch track-to-ground clearance and front swivel-wheels provide manueverability over carpet and in confined spaces such as stair landings.

Features:

• Wireless Motor Controls: Work in any handle position
• Removable ABS Panels: Provides easy cleaning and disinfecting of the chair
• Extending Footrest: And lower track angle increase patient sense of security
• 1 inch Track-to-Ground Clearance: Provides easier maneuverability over all surfaces
• Rechargeable Lithium-Ion Battery

Please contact Customer Service to order this item at 800.533.0523

The Ferno model 107 is designed to serve as a wheeled chair, a stair chair, and a flat stretcher. Sturdy, lightweight aluminum frame provides long-term durability, and the vinyl-coated nylon cover is strong and easy to clean. The model 107 features folding head-end posts and folding foot-end wheels. Includes patient restraints.

The Ferno Model 42 Stair Chair is designed to function well during patient transport in confined areas while allowing convenient, fold-down storage in limited space. 

Features:

• Two 4in/102mm stationary rear wheels
• Two 2in/51mm, low profile front guide wheels
• Four lifting handles with non-slip hand grips
• Vinyl-coated nylon cover resists stains and bodily fluids
• Two 7in/2134mm, quick release patient restraints
• Easily mounted on walls
• Locking safety latch
• Folding frame/compact storage position
• All metal frame construction
• Specially designed for confined areas such as hallways or multiple-landing stairways; anywhere access is severely limited
• Model 42 is 4in wider than model 48
• Two 4in rear stationary wheels and 2in low-profile front guide wheels facilitate transport on most floor types
• Locking safety latch maintains chair position during use

Load Capacity: 350 lbs
Weight: 19 lbs
Height: 37inch x 20inch x 24inch

JSA-800 Evacuation Chairs designed for use in confined areas. Ideal for use in restaurants, high-rise office buildings, airplanes, boats, narrow hallways and stairwells.