Tourniquets

• 100% Effective. Proven to be 100% effective during US army institute of surgical research testing
• The SOF®TT is applied the same to an arm or leg. Unlike other tourniquets that require you to learn two methods of application and implement the proper method when under stress, the SOF®TT is applied the same way to an arm or leg
• The SOF®TT is constructed of quality, high-strength materials. The tourniquet handle is machined from a solid piece of aircraft aluminum and maintains its strength in extreme temperatures. The tri-rings are molded acetyl, a high impact plastic that will also maintain its strength in extreme operating conditions
• The SOF® Tactical tourniquet is designed to reduce the chance of accidental release or mechanical failure. Unlike other materials including Velcro®, the fastening system will perform when soiled, muddy, frozen, or wet
• Safety set screw prevents accidental release of pressure during tactical patient movement. The screw is not required to gain hemorrhage control, but it is recommended if the patient will be moved in a tactical environment

The SAM® Junctional Tourniquet for hemorrhage control is designed to control bleeding in areas where standard tourniquets would not be effective, such as with IED/Blasts or high level amputations.

The Target Compression Device (TCD) is placed at or proximal to the injury site and inflated until the bleeding stops. Two TCDs can be used to occlude blood flow bi-laterally if needed.

Features:

• Patented buckle maintains correct base force to eliminate slack
• "Click" provides clear feedback to confirm when to secure strap to Velcro for correct application
• Large, repositional and/or removable Target Compression Device (TCD) ensure easy targeting
• A relief valve prevents over-inflation
• Removable hand pump quickly inflates the TCD to achieve hemorrhage control
• Quick application (typically under 25 seconds with training)
• Clinically proven to provide the prescribed safe and effective force for pelvic stabilization.
• Inguinal hemorrhage
• Axilla hemorrhage
• Pelvic immobilization
• <25sec application time
• Easy to Use

SAM® XT Extremity Tourniquet is engineered for rapid application in the harshest conditions. Its innovative design requires fewer windlass turns, enabling easier, faster training and more intuitive use. Meets MIL-STD 810G for durability.

• TRUFORCE™ BUCKLE: Slack is the main cause of a failed tourniquet application. The TRUFORCE™ buckle technology auto-locks to eliminate nearly all tourniquet slack by incorporating innovative baseline force control, activating locking prongs.
• TRUFLEX™ PLATE: Made of 100% nylon, the TRUFLEX™ Plate distributes forces as targeted circumferential pressure while providing additional support for the Metal Windlass Rod.
• METAL WINDLASS ROD & TIME BAND: The Metal Windlass Rod is machined of lightweight 6061-T6 aluminum giving it reliable strength and durability. The weather-resistant, night vision-optimized Time Band allows for secure usage in any environment.
• PRECISION STRAP: Velcro-dependent tourniquets can fail when wet or dirty. SAM XT solves this problem with the all-weather Precision Strap, made of single-layer nylon webbing and featuring intervaled holes that lock with the TRUFORCE™ Buckle to create a consistent, efficient primary security system. The secondary hook and loop system secures the remaining strap, adding stability and safety.

SAM® Extremity Tourniquet (SAM-XT) is a TCCC recommended limb tourniquet (non-pneumatic).

SAM junctional tourniquet for hemorrhage control is designed to control bleeding in areas where standard tourniquets would not be effective, such as with IED/Blasts or high level amputations. The Target Compression Device (TCD) is placed at or proximal to the injury site and inflated until the bleeding stops. Two TCDs can be used to occlude blood flow bilaterally if needed.

Features:

• For junctional hemorrhage
• For axilla hemorrhage
• For pelvic immobilization
• Designed for ease of use (4 step application)
• Stays firmly in place during patient transport
• Patented buckle provides the clinically correct force
• Repositionable compression device

Module Contents:

• 1 SAM junctional tourniquet
• 2 Target Compression Device
• 1 Handpump
• 1 Extender
• 1 Strap
• 1 Printed IFU
• 1 Instructional DVD
• 1 Nylon bag with MOLLE and internal storage pockets

​The SOF® Tactical Tourniquet Wide (SOF®TT-W) is the result of an exhaustive 24-month research initiative compiling end-user research and laboratory studies to develop a more effective, easier-to-use tourniquet for all environments. High-strength, lightweight alloy components are used in critical areas of function ensuring reliability in the most challenging of circumstances and on the largest of limbs. This was all accomplished while reducing the weight by approximately 15%.

The high-strength hook and buckle interface was designed for security, strength, and ease of application. The design allows for rapid routing of the tourniquet strap while eliminating need for re-threading the webbing through a buckle. By eliminating the requirement to re-route the webbing, the tourniquet is easier to use when operating under stress and reduces application time, both of which can result in reduced levels of blood loss and better quality patient care.

The SOF®TT-W also has a true 1.5" tourniquet strap providing a wider compression pattern than most standard tourniquets or tourniquets with a 1" constricting band moving through a 1.5" sleeve. This broader compression pattern allows for increased patient comfort and additional arterial compression.

The tourniquet handle is machined from a single piece of high-strength aluminum bar stock. The strength of the handle virtually eliminates the risk of product failure. It is then anodized to minimize the products signature in a tactical environment.

Each tourniquet ships with two UV resistant black rubber bands for mounting to your individual equipment.

Features:

• A true 1.5" constricting band for increase constricting pressure and patient comfort
• Newly designed quick-compression buckle technology that allows for:
  • Rapid re-routing of the band around trapped limbs without rethreading
  • Smoother buckle manipulation
  • Easier one-handed application
  • Faster application time
  • Increased durability
• Lower-profile, lighter weight alloy components, providing the required strength and durability only metal can offer
• Single application method regardless of location
• 15% lighter than the current SOF® Tactical Tourniquet and reduced size for easier storage
• Made in the USA.

The SWAT-Tourniquet™ (SWAT-T™) is a unique and multipurpose dressing. Its name provides a description for usage Stretch, Wrap, and Tuck, but also the communities for whom it was developed - military and civilian Special Weapons and Tactics teams. These teams operate in an environment that has a high incidence of penetrating trauma, and most (two-thirds) of preventable deaths in the operational environment are from extremity bleeding. The SWAT-Tourniquet allows a more rapid means to control extremity bleeding and allows application higher into the groin and axilla than other tourniquets. Its ease of application is one of its greatest benefits; individuals can effectively apply it in seconds with little to no prior training. At a third of the cost and weight of other combat used tourniquets, this tourniquet should find its way forward with every tactical operator.

• 100% Effective. Proven to be 100% effective during US Army Institute of Surgical Research testing.
• Simple application. The SOF®TT is applied the same to an arm or leg. Unlike other tourniquets that require you to learn two methods of application and implement the proper method when under stress, the SOF®TT is applied the same way to an arm or leg. By accounting for the factors of human performance in combat, we have minimized the risk of failure. Applying a tourniquet should not be a multiple choice exam; It should be simple and straight forward. The SOF®TT provides the necessary effectiveness with an unmatched level of simplicity to increase the overall effectiveness of the device.
• Durability. The SOF®TT is constructed of quality, high-strength materials. The tourniquet handle is machined from a solid piece of aircraft aluminum and maintains its strength in extreme temperatures. The tri-rings are molded Acetyl, a high impact plastic that will also maintain its strength in extreme operating conditions.
• Reliable. The SOF® Tactical Tourniquet is designed to reduce the chance of accidental release or mechanical failure. Unlike other materials including Velcro®, the fastening system will perform when soiled, muddy, frozen, or wet.
• Safety set screw prevents accidental release of pressure during tactical patient movement. The screw is not required to gain hemorrhage control, but it is recommended if the patient will be moved in a tactical environment.Dual locking rings offer a back up locking system.
• Made in the USA.

The Curaplex Tourniquet Holster is a durable pouch designed to keep your SAM® XT easily accessible while securely fastened, whether affixed to a belt or molle straps via its user friendly snaps.

Size: 8” in L x 2 3/4” in W x 2” in D
Material: 1000 Denier black ballistic nylon
Weight: 4oz
Attachment Type: Horizontal and vertical straps on the back with snap attachments
Made in the USA

• 2.25in tourniquet base
• 40in x 1.5in Constricting band
• Heavy weight denier nylon
• Powder-coated aluminum windlass

• 100% blood flow occlusion in 30 seconds (as measured by Doppler, BP and Oximeter sensors)
• Safe Compression - Can be applied in small, controlled increments and easily released
• One hand application - Easy to use and learn for all levels of medical and non-medical personnel.
• Multi-purpose application to arms, legs and trapped limbs
• Secure - Mechanical advantage system ensures that MATResponder does not slip or loosen
• Lightweight, compact design
• Durable - Operates in extreme conditions, such as mud, water and sand submersion, extreme cold, ice-encrustment and hard surface (concrete) impact

• Lightest, and smallest volume RMT
• Uses small ratcheting buckle, short ladder strap, and 1.5 webbing
• Can be quickly and effectively applied with a single hand, in total darkness, with thorough training
• Applies precise mechanical pressure using only gross motor skills
• System is self locking requiring no any additional steps
• Ratcheting sound when activated
• Users must train regularly for optimal response
• 0.75in Buckle and latter strap with 1-1/2in military spec webbing

The SAM® Junctional Tourniquet for hemorrhage control is designed to control bleeding in areas where standard tourniquets would not be effective, such as with IED/Blasts or high level amputations. The Target Compression Device (TCD) is placed at or proximal to the injury site and inflated until the bleeding stops. Two TCDs can be used to occlude blood flow bi-laterally if needed.

Features:

• Patented buckle maintains correct base force to eliminate slack
• "Click" provides clear feedback to confirm when to secure strap to Velcro for correct application
• Large, repositional and/or removable Target Compression Device (TCD) ensure easy targeting
• A relief valve prevents over-inflation
• Removable hand pump quickly inflates the TCD to achieve hemorrhage control
• Quick application (typically under 25 seconds with training)
• Clinically proven to provide the prescribed safe and effective force for pelvic stabilization.
• Inguinal hemorrhage
• Axilla hemorrhage
• Pelvic immobilization
• <25sec application time
• Easy to Use

Removable hand pump quickly inflates the Target Compression Device to achieve hemorrhage control.

To optionally change the shape of the TCD patient contact surface area, place the Extender accessory over the end of the TCD prior to inflation.

This item is on long term backorder, Please see suggested replacements in alternate products area below.

The SOF® Tactical Tourniquet Wide (SOF®TT-W) is the result of an exhaustive 24-month research initiative compiling end-user research and laboratory studies to develop a more effective, easier-to-use tourniquet for all environments. High-strength, lightweight alloy components are used in critical areas of function ensuring reliability in the most challenging of circumstances and on the largest of limbs. This was all accomplished while reducing the weight by approximately 15%.

The high-strength hook and buckle interface was designed for security, strength, and ease of application. The design allows for rapid routing of the tourniquet strap while eliminating need for re-threading the webbing through a buckle. By eliminating the requirement to re-route the webbing, the tourniquet is easier to use when operating under stress and reduces application time, both of which can result in reduced levels of blood loss and better quality patient care.

The SOF®TT-W also has a true 1.5" tourniquet strap providing a wider compression pattern than most standard tourniquets or tourniquets with a 1" constricting band moving through a 1.5" sleeve. This broader compression pattern allows for increased patient comfort and additional arterial compression.

The tourniquet handle is machined from a single piece of high-strength aluminum bar stock. The strength of the handle virtually eliminates the risk of product failure. It is then anodized to minimize the products signature in a tactical environment.

Each tourniquet ships with two UV resistant black rubber bands for mounting to your individual equipment.

Features:

• A true 1.5" constricting band for increase constricting pressure and patient comfort
• Newly designed quick-compression buckle technology that allows for:
  • Rapid re-routing of the band around trapped limbs without rethreading
  • Smoother buckle manipulation
  • Easier one-handed application
  • Faster application time
  • Increased durability
• Lower-profile, lighter weight alloy components, providing the required strength and durability only metal can offer
• Single application method regardless of location
• 15% lighter than the current SOF® Tactical Tourniquet and reduced size for easier storage
• Made in the USA
• Color: Trainer Blue

PSSOFTT-W-TRN

• Fade Resistant, Moisture Repellent 1000 Denier Nylon
• Mil-Spec 1” PALS/MOLLE
• Adjustable Hook and Loop Flaps for maximum sizing
• Reinforced Stitching & Tacking

The Eleven10 Rigid Tourniquet Case can hold either the original SOF Tactical Tourniquet or the SOF Tactical Tourniquet Wide.

This hard-sided tourniquet case is designed to give you easy access to your tourniquet when seconds matter. It can be worn on your duty belt, MOLLE/PALS compatible vest, or in the accessory position on your Safariland drop leg holster. The rigid case holds your tourniquet securely in place utilizing friction, so there's no straps, buckles, or flaps to deal with. It offers true one-handed gross motor skills deployment of the tourniquet even when your hands are bloody or wet. Just grab the exposed portion of the tourniquet and with a swift pull, it releases.

Massive bleeding in an extremity can often be stopped using a tourniquet, but seconds can be the difference between life and death. Having your tourniquet in a Rigid Tourniquet Case will ensure that you can access and deploy your tourniquet in seconds, and it will always be on your person.

The injection-molded Rigid Tourniquet Case offers numerous mounting options and ride adjustment. It's compatible with Blade-Tech, Safariland, Tactical Tailor, and Raven Concealment Systems mounting solutions. Many of the mounting solutions can be mounted in the vertical or horizontal positions.

Features:

• Keeps your tourniquet close at hand for rapid deployment
• Holds SOFTT-NH or SOFTT-W utilizing friction with no modifications to the case
• Injection-molded nylon case to stand up to rugged Law Enforcement and Military usage
• 2-piece design allows water drainage from the bottom of the case
• Textured front panel
• Multiple mounting positions to adjust the right height (can be mounted vertically, horizontally, or inverted)
• Mounting: Police duty belt (belt attachment fits up to a 2.25" belt)

For trainers and educators, H&H Medical has made it easier to carry and prepare a class on how to use a SWAT-T Tourniquet. The SWAT-T Individual Trainer is an easy-to carry pouch with one (1) blue SWAT-T trainer tourniquet. Instructions for use are printed on the back of the pack and the pouch is resealable for reuse. The Individual Trainer is also available in our SWAT-T Trainer Pack along with a training card demonstrating the proper use of the SWAT-T.

TacMed's standard tourniquet case similar to a flash bang pouch. MOLLE-compatible.

• Compact, lightweight & rugged for use in the tactical environment
• Pre-assembled, ready-to-use and easy-to-apply at or near the point of injury
• Simultaneous occlusion of blood flow to both lower limbs
• Two compression pads, pre-positioned and individually adjustable
• Circumferential compression buttocks pad safely secures device to patient
• Lanyard and toggle lock prevent pressure reduction during transport
• Writeable area to document time of application
• Sleeves help pre-position pads and aid in smooth application
• Step-by step Instructions included
• Cleared for 510(k) by the FDA

• Tailored specifically for your C-A-T®, to protect it from exposure to the elements
• PALS/MOLLE-style connectors for versatile attachment to the duty vest, gear or belt (mounted horizontally or vertically) for rapid & easy access
• 1000D IR Signature Reduced Nylon
• Easy-open pull elastic tab with tourniquet ID patch – “TQ”
• NATO stock numbers available for COY and ODG. Contact Customer Service for details.

C-A-T® Holder Product Information Sheet

The Gen 7 C-A-T® RIGID TQ Case® features:

• Allows you to carry a Gen 7 C-A-T® tourniquet on your duty/patrol/pistol belt so you have life-saving equipment on your person at all times
• Blade-Tech Tek-Lok™ belt attachment fits up to a 2.25in belt
• Can be mounted either vertically or horizontally or attached to a safariland drop leg shroud
• Injection molded nylon case to stand up to rugged LE/Mil usage
• Cross medical identifier patch included
• Compatible with the C-A-T® Gen 7 (sold separately)

NOTE: Compatible with the C-A-T® Gen 7 (sold separately).

• Tailored specifically for your C-A-T®, to protect it from exposure to the elements
• PALS/MOLLE-style connectors for versatile attachment to the duty vest, gear or belt (mounted horizontally or vertically) for rapid & easy access
• 1000D IR Signature Reduced Nylon
• Easy-open pull elastic tab with tourniquet ID patch 
• Accommodates both Gen 6 and Gen 7 C-A-T Tourniquets (not included)

The patented C-A-T® is a true one-handed tourniquet proven to be 100% effective by the U.S. Army’s Institute of Surgical Research. Tests proved that the C-A-T® completely occluded blood flow of an extremity in the event of a traumatic wound with significant hemorrhage.

The C-A-T® utilizes a durable windlass system with a patented free-moving internal band providing true circumferential pressure to the extremity. Once adequately tightened, bleeding will cease and the windlass is locked into place. A hook and loop windlass retention strap is then applied, securing the windlass to maintain pressure during casualty evacuation. The C-A-T®’s unique dual securing system avoids the use of screws and clips which can become difficult to operate under survival stress or where fine motor skills are compromised.

Product Features:

• Official Tourniquet of the U.S. Army
• Proven to be 100% effective in occluding blood flow in both upper & lower extremities by the U.S. Army’s Institute of Surgical Research
• NEW Single Routing Buckle for faster application, decreased blood loss, effective slack removal, fewer windlass turns, and simplified training with single protocol application standards
• Includes reinforced windlass, stabilization plate, windlass clip and writeable windlass security strap
• Featuring NAR's signature Red Tip Technology®elliptical tab providing added visual clues during application