IV Admin Sets

* 10 Drop chamber * Vented spike * Coil tubing clave * Reduces tube entanglement that normal administration sets typically incur when working in a non-clinical environment * Needleless and pre-slit needle injection site * Rotating luer lock * Non-DEHP tubing * 96in tubing when stretched, yet still retains its coil memory when released with minimal to no recoil California Proposition 65 Warning: ⚠ WARNING: These products can expose you to chemicals such as vinyl chloride, ethylene oxide, bisphenol-A (BPA), diisodecyl phthalate (DIDP), and/or di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. The above warning is required under California’s Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as “Prop 65”. Some ICU products may be sterilized using ethylene oxide and some ICU intravenous tubing and drip chambers are manufactured using polyvinyl chloride (PVC) that may contain vinyl chloride, DIDP and/or DEHP. Also, certain manifold, stopcock, connector, and check valve products are manufactured using polycarbonates that may contain BPA. This shipment may contain one or more of these products.

Blood Administration Sets With Hand Pump * Priming Volume: 69mL * Length: 85in (216cm) * 10 drops/mL * Y-type * 3 roller clamps * Drip chamber with 170 micron blood filter * Pump chamber * Injection site 6 inches above distal end * SPIN-LOCK® connector * Latex Free

Selec-3® is a 3-in-1 IV administration system that features a multidrip chamber, 10-15-60 drop, and a removable extension set. The luer activated Y-site was designed to accommodate the new luer locking pre-filled syringes. This set features luer locking Y-site, a pre-pierced Y-site and a built-in extension set.BMB30-102

* Back Check Valve * 2 Roller Clamp(s) * 3 SmartSite™ Y-site(s) 6in, 36in, 87in * (1 above pumping segment and 2 below) from 2-piece Male Luer Lock * 60 Drop * Length: 117 in (297 cm) * Priming Volume: 25 mL * Fluid Path Sterile

CONTINU-FLO Solution Set * Vented Spike * 2 CLEARLINK Luer Activated Valves * Backcheck Valve * Male Luer Lock Adapter with Retractable Collar * 60 drops/mL * Length: 104” (2.6m) * Contains DEHP * Sterile Fluid Path * Nonpyrogenic

Add-on Burette Set with ULTRASITE® Valve * Priming volume: 3.0mL * Length: 20in (51.0 cm) * Non-vented spike * Roller clamp * 150 mL burette chamber * Slide clamp * Spike adapter * No Automatic Shutoff * Latex free

* Priming volume: 18mL * Length: 84in (213.4cm) * Universal Spike (15 drops/mL) * Roller Clamp * Injection Sites 28in and 6in above Distal End * SPIN-LOCK® Connector * DEHP free * Latex free * Contains BPA * Contains PVC * Non-vented * Sterile

Secondary medication set with male luer lock adapter. Interlink® lever lock cannula (detached). Hanger for primary solution container is provided. Approximately 10 drops/mL . Approximate overall length 37in (94cm).* Contains DEHP* Fluid path is sterile, nonpyrogenic

Alaris Smartsite Half Set

Blood, IV administration set, Y-type blood/solution set with standard blood filter (170 to 260µ) and 1 Clearlink® luer activated valve 6in from male luer lock adapter. Approximately 10 drops/mL. Approximate overall length 103in (2.6m).* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C8720

* Priming Volume: 15mL * Length: 88in * 10 drops/mL * Non-vented IV set * SafeLine injection site 16” above distal end * SafeDAY valve 10” above distal end * Removable extension set * Sliding SPIN-LOCK connector * Do Not contain natural rubber latex BB352240

* Length: 83 inch * Priming Volume: 6 mL * Half Set (no Spike) Blue Striped Microbore Set * With female luer lock * Round and Bodyset keys * Slide clamp * Lower needleless y-site * Male luer lock/anti-siphon valve * Recommended for use with the CME BodyGuard® 323 and BodyGuard 121 Pump

Primary Gravity IV Set features: * 3 Care Sites * Injection Site BB354205

The CONMED STAT 2® IV Gravity Flow Control devices are designed to control IV fluid and medications when electronic infusion monitoring is not medically necessary. The STAT 2® product line offers convenience and safety to both patient and healthcare provider. * Length: 105in * One-handed operation * Ideal for routine hydration and antibiotic therapy * 60 drop primary has a universal vented drip chamber with 15 micron filter and spike, Controller, in-line back-check valve, 2 non-latex swabbable valve ”Y” sites and a distal luer/slip lock connector, 84” length. * Security window minimizes accidental manipulation of dial face * Gravity set, check valve, 3 needle-free valves 88in, 42in and 10in from 2-piece male luer lock

* Length: 117 inches * Tubing I.D.: 0.054 inches * Priming Capacity: 5.4mL * DEHP Free * Latex Free

IV Admin Set features: * Length: 83in * 10 Drop * Non Vented Drip Chamber * Roller Clamp * 2 Needleless PRN sites * Luer Lock * Made from medical grade PVC, non-pyrogenic * Not made with natural rubber latex * Does not contain DEHP * Individually packaged, sterile and needleless

CONTINU-FLO Solution Set. Non-vented with 2 CLEARLINK Luer activated valves, backcheck valve and retractable collar. Sterile, latex-free, and non-DEHP. 10 drops/ml, 96in. Box of 48.* Non-vented* 2 CLEARLINK Luer activated valve* Backcheck valve* Retractable collar

Continu-Flo® solution set with 0.22μ upstream high pressure extend life filter and 2 Clearlink® luer activated valve 6in and 84in from male luer lock adapter. Approximate length 104in.* Contains DEHP* Fluid path is sterile, nonpyrogenic

IV administration set, Continu-Flo® solution set with 3 Interlink® injection sites 6 inch, 42in and 90in from male luer lock adapter. Approximately 10 drops/mL . Approximate overall length 110in (2.8m). Set has tubing that is compatible with the BAXTER colleague series volumetric infusion pumps and Flo-Gard™ 6201 and 6301 series volumetric infusion pumps.* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C6537

IV solution set, minidrip, with 1 Clearlink® luer activated valve 6in from male luer lock adapter. Approximately 60 drops/mL . Approximate overall length 76in (1.9m). Set has tubing that is compatible with the colleague series volumetric infusion pumps and Flo-Gard™ 6201 and 6301 series volumetric infusion pumps.* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C8402

Designed with one needleless Y-site and two luer activated Y-sites. The extension set is 18in in total length, has the additional luer activated Y-site, includes a pinch clamp and has a spin lock.

AdditIV® Primary Administration Sets W/ Backcheck Valve and SAFELINE® Split Septum Injection Sites * Priming volume: 17mL * Length: 88in (223-1/2 cm) * 60 drop/mL * Universal spike * Backcheck valve * SAFELINE® split septum injection sites 62 inch, 27 inch and 6 inch above distal end * Roller clamp * Slide clamp * SPIN-LOCK® connector * DEHP-Free * Latex free

Primary set - with convertible piercing pin and sight chamber, upper backcheck valve, 2 prepierced Y-sites, 2 slide clamps, Cair™ clamp, and secure lock male adapter. California Proposition 65 Warning: ⚠ WARNING: These products can expose you to chemicals such as vinyl chloride, ethylene oxide, bisphenol-A (BPA), diisodecyl phthalate (DIDP), and/or di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. The above warning is required under California’s Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as “Prop 65”. Some ICU products may be sterilized using ethylene oxide and some ICU intravenous tubing and drip chambers are manufactured using polyvinyl chloride (PVC) that may contain vinyl chloride, DIDP and/or DEHP. Also, certain manifold, stopcock, connector, and check valve products are manufactured using polycarbonates that may contain BPA. This shipment may contain one or more of these products.

Features: * Non-vented spike * Roller clamp * 150 mL burette chamber with CARESITE valve * Slide clamp * CARESITE injection site 6 in. above distal end * SPIN-LOCK® connector * Not made with natural rubber latex * Priming volume: 16.0 mL * Length: 88 in. (223.5 cm) * Sterile