IV Admin Sets

IV solution set, minidrip, with 1 Interlink® injection site 6in from male luer lock adapter. Lever lock cannula (detached). Approximately 60 drops/mL . Approximate overall length 76in (1.9m). Set has tubing that is compatible with the colleague series volumetric infusion pumps and Flo-Gard™ 6201 and 6301 series volumetric infusion pumps.* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C6402

* Baxter FloGard® Compatible * Universal vented/non-vented * 10 drop/mL spike * DEHP-Free * PVC fluid path * Length: 97 inches * Two Clave® Y-Sites * Backcheck valve * Roller clamp * Slide clamp * Pyrogen Free * Latex Free

* Priming volume: 20.0mL * Length: 112in (284.5cm) * 15 Drops/ml * Universal spike * Backcheck valve * Needlefree Access Ports 85 inch, 41 inch and 6 inch above distal end * Roller clamp * Sliding SPIN-LOCK connector * DEHP free * Latex free

* Gravity set, check valve, 3 needle-free valves 88in, 42in and 10in from 2-piece male luer lock

IV administration solution set with 2 Interlink® injection sites 6in and 30in from male luer lock adapter. Approximately 10 drops/mL . Approximate overall length 100in (2.5m). Set has tubing that is compatible with the colleague series volumetric infusion pumps and Flo-Gard™ 6201 and 6301 series volumetric infusion pumps.* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C6425

Designed with two needleless Y-sites and one luer activated Y-site. The extension set has the additional needleless Y-site, includes a pinch clamp and a spin lock.

Minidrip Continu-Flo® solution set with 3 Interlink® injection sites 6in, 42in and 86in from male luer lock adapter with retractable collar. Approximately 60 drops/mL . Approximate overall length 105in (2.7m). Set has tubing that is compatible with the colleague series volumetric infusion pumps and Flo-Gard™ 6201 and 6301 series volumetric infusion pumps.* Contains DEHP* Fluid path is sterile, nonpyrogenicBA2C6546

Gravity administration set features: * 20 Drop Vented/Non-Vented Spike * 15 Micron Filter * 1 SmartSite® Needle- Free Valve * Swivel Male Luer Lock * Length: 100in * Priming Volume: 17mL * Non-DEHP formulation * Latex-free

Plum Set features: * Conversion * Microbore * Y-Sites * 2 clave connectors * Length: 76in California Proposition 65 Warning: ⚠ WARNING: These products can expose you to chemicals such as vinyl chloride, ethylene oxide, bisphenol-A (BPA), diisodecyl phthalate (DIDP), and/or di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. The above warning is required under California’s Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as “Prop 65”. Some ICU products may be sterilized using ethylene oxide and some ICU intravenous tubing and drip chambers are manufactured using polyvinyl chloride (PVC) that may contain vinyl chloride, DIDP and/or DEHP. Also, certain manifold, stopcock, connector, and check valve products are manufactured using polycarbonates that may contain BPA. This shipment may contain one or more of these products.

Amsino's I.V. Administration sets with flow control devices are designed to control I.V. fluid and medications using a regulator dial to control the rate of infusion. Features: * Length: 96in * Approximate Priming Volume: 19mL * 10 drops/mL * Vented/Non-Vented * Back Check Valve * Flow Controller * (2) Sure-Lok® Needle-Free Y-Sites * Slide Clamp * Rotating Male Luer Lock * Clear markings on the dial allow you to easily set a specific flow rate * Non-Pyrogenic * DEHP-Free * Latex-Free * Sterile

Both Y-sites are luer activated, includes a pinch clamp and a spin lock on the extension set.

IV Adjustable Administration set with Ultra Site

* Length: 94 inch * Priming Volume: 5mL * Yellow Striped Microbore * Vented Spike * Round and Bodyset Keys * Slide Clamp * Male Luer Lock/anti-siphon valve * For Use with the CME BodyGuard® ColorVision™ 545 Epidural and CME BodyGuard 323 Pumps (Microbore)

Basic Administration Sets With SAFELINE® Split Septum Injection Site * Priming volume: 18mL * Length: 94in (239 cm) * 60 drop/mL * Universal spike * Roller clamp * SAFELINE® split septum injection sites 38 inch and 6 inch above distal end * Slide clamp * SPIN-LOCK® connector * DEHP-Free * Latex free

IV Admin Set * 15 Drop * 112in * 3 Clear Safeday Valves * Spin Lock Connector

The Nimbus Administration Set is designed to administer fluids/medication from a container to a patient through a needle or catheter. The fluid path is sterile (EtO sterilized), non-pyrogenic, not made of DEHP, not made with natural latex. The set is single use only. Features: * Tip protector * Luer lock cap * Female Luer lock * Cassette * Anti-free-flow clamp * 0.2 micron air eliminating baby filter * Slide clamp * Backcheck valve * Male luer lock adaptor * Luer cap * Length: 67in (170cm)

510K approved IV pump sets for use with Baxter Spectrum and Flo-Gard® 6201 and 6301 series pumps. TUBETECH® technology provides +/- 5% accurate fluid delivery over 24 hour timeframe. This set is DEHP free, latex free and non-pyrogenic. IV Admin Set Includes: * (1) Needle-Free Valve * Roller Clamp * (2) Slide Clamps * Rotating Male Luer Lock * Retractable Collar

Administration set for use with the Alaris® pump module. Set contains an integrated safety clamp fitment to help prevent accidental free-flow. Configuration is available with integrated SmartSite® needleless valve ports, split septum needleless injection sites, and standard injection ports. Alaris® Pump module was previously known as Medley® pump module.* Infusion set with check valve and 2 needle-free valve ports, 6in and 83in from 2-piece male luer lock* DEHP-free

Primary Sapphire™ Infusion Set features: * Convertible Piercing Pin with Sight Chamber * Slide Clamp * Check Valve * Clave™ Y-site * Administration Cassette * CAIR™ Clamp * Secure Lock * Available in Various Sizes California Proposition 65 Warning: ⚠ WARNING: These products can expose you to chemicals such as vinyl chloride, ethylene oxide, bisphenol-A (BPA), diisodecyl phthalate (DIDP), and/or di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. The above warning is required under California’s Safe Drinking Water and Toxic Enforcement Act of 1986, more commonly known as “Prop 65”. Some ICU products may be sterilized using ethylene oxide and some ICU intravenous tubing and drip chambers are manufactured using polyvinyl chloride (PVC) that may contain vinyl chloride, DIDP and/or DEHP. Also, certain manifold, stopcock, connector, and check valve products are manufactured using polycarbonates that may contain BPA. This shipment may contain one or more of these products.

MedSystem III® nitro set with 2 piece male luer lock. Vented/nonvented nitro tubing for the Alaris MedSystem III® with no injection sites.

Primary Sapphire™ Infusion Set — with convertible piercing pin, cassette, 1.2 micron filter, slide clamp, Clave™ Y-site, and secure lock male adapter. * Length: 114 inches * Priming Volume: 18mL * Tubing Inner Diameter: 0.100 inches * DEHP Free

IV Blood Administration Set features: * High Flow * Universal * With Pump * (1) Ultrasite * (1) Safeline Injection Site

Administration set for use with the MedSystem® III infusion pump. All sets are Latex-free and contain an integrated mechanism to help prevent accidental free flow. Set configurations are available with SmartSite™ needle-free valves and standard injection ports.

* Priming volume: 16mL * Length: 88in (224cm) * 10 drops/mL * Non-vented IV admin set with two SafeDay™ valves (6in and 12in above distal end) * Sliding spin-lock connector BB352243