Intubation Aids

The MAD® (Mucosal Atomization Device) is used for delivery of atomized medication to the nasal, oral, laryngeal, tracheal and pulmonary mucosal surfaces. Reliable atomization of topical solution across the nasal and oropharyngeal mucous membranes

Features:

• No needles
• Less frightening for children
• Consistent, reliable spray every time
• Works in any position

• Blend of high and low density polyethylene for optimal stiffness
• Clear depth calibrations
• Fits 4mm to 11mm ID tubes
• Both straight and curved tip available

• Reliable carbon dioxide detectors help verify endotracheal tube placement
• Responds quickly to exhaled CO2 with a simple color change from purple to yellow
• Breath-to-breath response
• Constant visual feedback for up to 2 hours

The Ambu TubeChek is a device that rapidly and reliably confirms if endotracheal tube placement is correct or not.

Features:

• Instant feedback
• No expiry date
• Illuminates in the dark

Flexible UltraSet circuit connectors are designed to minimize flow resistance while maintaining low dead space. Double-swivel elbows allow flexible positioning of circuits. Self-sealing, ported elbows permit suction or bronchoscopy without ventilator disconnection.

Features:

• Adjustable Tubing
• Maximum Internal Diameter
• 360° Swivel

Product Benefits

• Eliminates twisting or tugging on the tracheal tube connector
• Reduces the possibility of contamination during suctioning procedures
• Adjusts to any circuit angle
• Allows repositioning of tubing and circuit and minimizes torque on the tracheal tube
• Low dead space

• Consistent, fine atomized spray for direct coverage of nose, pharynx, larynx and trachea
• Targeted coverage - narrow, long stylet easily reaches vocal cords and conforms to patient anatomy
• Adapts to any luer-lock syringe
• Clinician chooses the medication and exact dose and volume (down to 0.1mL)
• Available in adult and pediatric sizes

The PressureEasy® Cuff Pressure Controller is designed to continuously monitor tracheal cuff pressure. Its indicator window signals cuff pressure is maintained between 20-30cm/H2O. In addition, the airway pressure auto-feedback feature boosts cuff pressure to ensure proper sealing when high pressures are used during ventilation.

As a single-patient use device, the PressureEasy®Cuff Pressure Controller reduces potential for infection and eliminates sterilization issues with quarantined or isolated patients.

• Built in bacterial filter protects both patient and clinician
• CO2 Easy for patients weighing 15kg (33lbs.) or above
• Pedi CO2 Easy for patients weighing 1 - 15kg (2.2 - 33lbs.)
• 3 year shelf life
• Designed for fast, easy airway assessment
• Verifies proper endotracheal tube placement
• Helps prevent unwarranted intubations
• Confirms cardiac output during CPR
• Expansive 2 inch Diameter Visual Indicator makes rapid breath-to-breath response easy to see
• Anti-fogging agent reduces susceptibility to moisture and humidity, while ensuring continuous lens clarity (CO2 Easy only)
• Complies with Standard of Care Guidelines from the American Heart Association, American College of Emergency Physicians, American Association for Respiratory Care and the American Society of Anesthesiologists

• Deflates and inflates high volume, low pressure endotracheal or tracheal cuffs
• An easier alternative to other methods that are required to check cuff pressure
• Air vent button and inflator bulb adjusts cuff pressure quickly and easily
• Gauge shows recommended pressure range in cm H2O

• ET >4.0 mm
• Sidestream
• Intubated
• Short term
• Gas capnography
• Latex free
• Non-sterile
• Single patient use

• 3.5mm I.D. Membrane on sampling side

• Articulating rounded flex tip makes difficult navigation between the vocal cords easier
• Innovative slider tabs allow for anterior and posterior movement of the tip
• Smooth silicon tip minimizes the risk of tracheal trauma during intubation
• Bright phosphorous coating on tip increases visibility, even in the presence of UV light
• Graduating centimeter marks from 10cm to 50cm (65cm overall length)
• Use with ETTs with 7mm inner diameter or larger