Defib & AED Accessories

Battery charger and Quik-Pak pacing/defibrillation/ECG electrodes.

Includes:

• 2 sets electrodes
• 1 battery charger
• Replacement instructions
• Discharger for safe disposal of used Charge-Pak™.
• For use with LifePak®™ CR plus and LifePak®™ express.

11403-000001

• For 804 gauge only

ADC804C

The Ferno M-200 Defibrillator Mount Kit is designed to secure the Physio Control Life Pak 12 and 15, with or without a bag.

Features:

• Each Ferno Defibrillator Mount is easily installed onto a countertop or bench
• A quick release mechanism allows easy locking and unlocking of a defibrillator for graband-go convenience on scene
• Each Ferno Defibrillator Mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Ferno Defibrillator Mounts accommodate the defibrillator and soft storage accessories

Specifications:

• Depth: 12 in 30 cm
• Height: 15.25 in 38 cm
• Width: 12.5 in 32 cm

Assist-a-lead will prevent EKG wires from becoming a tangled mess. It takes just seconds to apply and allows for rapid application of the electrodes. Assist-a-Lead slides down the EKG leads and keeps them separated. This device saves time with each use. You will no longer struggle with the tangle of wires before applying electrodes on your patient.

As a single-patient-use ear sensor that is placed securely in the cavum conchae (the deep hollow near the ear canal opening), the E1 allows clinicians to combine performance with a reliable alternative monitoring site while minimizing cross-contamination.

• Avoids cross-contamination risks
• Faster detection of desaturation/resaturation
• Alternate monitoring site with easy access during surgery, resuscitation, in patients with finger deformities or when digit access is not possible
• Offers reliable measurements during extremely low perfusion allows for hands-free monitoring
• Ear site may offer advantages for pleth variability (PVI®) monitoring to help clinicians assess fluid responsiveness

Infant/child key used in infant/child defibrillation with the Heart Start® FRx defibrillator.

• Energy delivered: infant/child: nominal 50J into a 50ohm load.

989803139311

NCE mounts provide the maximum protection for your Zoll defibrillator, minimizing the risk of costly repairs due to device impacts or falls during transport. More importantly, these mounts will protect your EMT’s from flying defibrillators in the event of a sudden stop, accident or roll-over.

• One hand quick release
• 360° Swivel, easy positioning and viewing
• Easy immediate access
• Easily mounts to countertop
• Baked white enamel for durability

DIX9000

Unsecured medical equipment stored in ambulances, helicopters, other EMS vehicles, and crash carts have the potential to become a damaging object, as the vehicle makes sudden turns, stops and starts. The result can be damage or destruction of the costly equipment and/or a potential injury to the patient and vulnerable attendants. To spare the expense of costly repair or replacement of equipment, and medical care and possible legal redress for injury, consider outfitting your EMS vehicles or crash cart with a Defibrillator Holder.

A precision-crafted instrument of hardened steel for accurate measurement of tracing intervals. Point protector has built-in 40mm metric scale. Measures 4-3/4in.ADC395

• AC Power Adapter for LIFEPAK 15

The Ferno P-300 Defibrillator Mount Kit is designed to secure the Philips HeartStart MRx defibrillator.

Features:

• A quick release mechanism allows easy locking and unlocking of a defibrillator for grab-and-go convenience on scene
• Each Ferno defibrillator mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Ferno defibrillator mounts are easily installed onto a countertop or bench
• Ferno defibrillator mounts accommodate the defibrillator and soft storage accessories

Designed to measure electrocardiogram waveforms. Plastic protective cover features a molded ruler to aid in measurements. Made in Germany.

Download case data: Download your patient case data from the AED or monitor and forward to your medical director, colleague, or patient's physician for analysis, erase it from the defibrillator, and synchronize case times and defibrillator clock with your PC.

Manual or automatic: Heart Start® data messenger can process cases under your control in "manual mode" or simplify your responders’ job by processing cases automatically in the background, according to pre-configured preferences – no need to interact with software.

Batch file: Heart Start® MRx monitor/defibrillator users can automatically download multiple patient summaries at once via LAN and forward them all in one batch to either an event review pro database or electronic patient care reporting system (ePCR).

Real-time consultation: Heart Start® MRx users can forward 12-lead ECGs and vital sign data from the field to either the Heart Start® Tel.

861451-A01

• LifePak Adapter Tray for REDI-CHARGE Charger and Li-ion Battery.

No additional details are available at this time.

Replacement AC Power Adapter/Charger, For the Propaq MD

Power cord is sold separately.

No additional details are available at this time.

• AC Power Module for HeartStart® MRx

M3539A-REF

Caretaker Wireless Bluetooth

• 3-lead (lead 2) Bluetooth ECG Patch
• Charge Case
• Cable 

Unsecured medical equipment stored in ambulances, helicopters, other EMS vehicles, and crash carts have the potential to become a damaging object, as the vehicle makes sudden turns, stops and starts. The result can be damage or destruction of the costly equipment and/or a potential injury to the patient and vulnerable attendants. To spare the expense of costly repair or replacement of equipment, and medical care and possible legal redress for injury, consider outfitting your EMS vehicles or crash cart with a defibrillator holder.

• 360° Swivel, easy positioning and viewing

DIH7000

Power Cord, Hospital Grade, 8 foot

• Test load for use with M3508A pad cable.
• Used to test hands-free cables with plug connector.

M3725A

The Ferno M-201 Defibrillator Mount Kit is designed to secure the Physio Control Lifepak 12 with AC adapter.

Features:

• A quick release mechanism allows easy locking and unlocking of a defibrillator for grab-and-go convenience on scene
• Each Ferno defibrillator mount features a swivel base for easy positioning and viewing of the monitor screen during patient care
• Each Ferno defibrillator mount is easily installed onto a countertop or bench
• Ferno defibrillator mounts accommodate the defibrillator and soft storage accessories

Specifications:
Depth: 12 in 30 cm
Height: 17.75 in 45 cm
Width: 15.75 in 39 cm