Suction Canisters

• Pour spout, vacuum, and patient ports
• With hydrophobic shutoff filter

Bemis Suction Canister features:

• Hi-Flow 
• 1200cc
• White Lid
• Disposable
• For SSCOR Suction Units

Suction Canister features:

• Includes Tubing
• For use with the LCSU 4 (300ml) Suction Unit
• Disposable
• 300ml

LA886000

This hard, disposable canister has an automatic overflow shutoff valve is located inside the lid to help prevent cross contamination of regulators and wall vacuum outlets, and 90° adapters allow tubing to connect at right angles to help prevent kinking and impeded fluid flow. The locking lid on the 1200, 2000 and 3000cc sizes encourages the proper disposal of collected wastes and enhances worker safety. Accessory port and orthopedic port are included.CD65651-212E

This 1200cc canister comes with a hydrophobic shut-off filter. It contains pour spout, vacuum and patient ports as well as built-in critical measure.

• Self-sealing lid provides leak-free seal
• Dual filter system prevents overflow and premature shutoff
• Large, easy to read graduations
• Lids contain multiple ports for versatility
• Frosted panel provides writing area when needed
• Nestable for storage
• Disposable, single-use
• Pour spout, vacuum and patient ports
• With hydrophobic shutoff filter
• Built–in critical measure

Rigid suction canisters are designed to meet high volume collection and disposal needs. Canisters contain pour spout, vacuum and patient ports as well as a stepped patient port for direct tubing access.

• Pour spout, vacuum, tandem and patient ports
• Stepped patient port for direct tubing access
• Lids contain multiple ports for versatility
• Frosted panel provides writing area when needed
• Nestable for storage
• Disposable, single-use
• Self-sealing lid provides leak-free seal
• Large, easy-to-read graduations
• Effectively filters aerosolized microorganisms and particulate matter
• Positive shut-off valve closes immediately when fluid reaches the top
• Foam guard keeps float valve securely in place; prevents premature shutoff

BE485410

Replacement disposable canisters for most suction units with an Aerostat® Hi-flow bacterial filter.

• For small-volume use
• Pour spout, vacuum and patient ports
• Built-in critical measure
• Disposable

• Durable plastic container system designed for collecting and retaining aspirated materials
• Float shut-off with built-in filter increases flow, eliminating damaging backflow to the suction regulator
• Foam guard and float valve ultrasonically welded in place, preventing premature shutoff

Suction Canister features:

• Includes Tubing
• For use with the LCSU 4 (800ml) Suction Unit
• Disposable
• 800ml

LA88005004

• Replacement Quickdraw suction canister with integral catheter enables the Quickdraw to be used as a ‘handheld’ suction.
• The standard Quickdraw canister with an integral catheter is the quickest way to remove fluids from a patients airway.

SS2480-20

The barbed Quickdraw canister allows the device to be used like a "traditional" suction device. The Quickdraw is placed by the patient and the patient tubing and suction catheter are connected to the barbed fitting on the canister.

• For use with the S-SCORT Quickdraw suction unit
• Kit includes:
  • (1) SSCOR Quickdraw Barbed Canister
  • (1) Suction tubing
  • (1) HI-D Big Stick Suction Tip

SS2483-15

Refill canister for use with the Curaplex® Manual Suction Pump.

Refill Includes:

• Pump Canister
• (2) Soft catheters
  • (1) Small
  • (1) Large

 

Suction Canister features:

• Hi Flow Solo Canister
• With Aerostat® filter
• Float valve shutoff
• White lid
• 800cc
• Diameter: 5in
• Bottom Diameter: 3 3/8in Top 
• Height: 6 5/8in

Collection Canister w/Filter and Suction Tubing features:

• Disposable
• 1200ml

LA883000

Suction Canister features:

• Disposable suction canister without tubing
• Holds 800ml
• Compatible for use with LCSU 3, LCSU 2, and LCSU ® 4.

• Size: 1500mL
• Features built-in tubing hooks that eliminate the need to wrap excess tubing around regulator, preventing kinks and occlusions.
• The Snap-on lid with the audible "snap" gives clear confirmation that the lid is properly sealed and secure.
• A filter located in the lid is designed to enhance performance.
• The filter design and self-sealing material improve flow 20%. When the filter comes into contact with moisture, it immediately stops flow from the patient and prevents fluids from entering the system.
• Caps for all ports are attached to the lid.

Receptal® Canister Liner features:

• 100% Leak tested seamless liners minimize risk of contamination
• Integrated rotating lid tube promotes ease of set-up and cost efficiency
• Multiple liner options to meet your clinical and safety needs
• Designed with permanently attached lids and a multifunctional lid tube which helps decrease the risk of fluid exposure and improves ease-of-use
• An anti-foaming emulsion that prevents froth formation and aerosolization, reducing the risk of contaminant exposure while maximizing fluid capacity

This replacement canister is for use with the Rico Model RS-4X aspirator.

Our CRD™ suction liners offer many features to satisfy all your fluid collection, retention and disposal requirements, such as an orthopedic port on the 1500 and 3000cc sizes; a thin, semirigid, seamless canister to minimize the possibility of contamination; and a locking lid to maintain a closed system.

Receptal® Suction Canister features:

• Size: 1500mL
• Made of polycarbonate material
• Designed with durability and efficiency in mind
• To be used with the same size Receptal® disposable liners
• Easy to read volume marks
• Large patient label strip for convenient documentation
• Canister “T” designates vacuum source connection to simplify canister set up
• Non-sterile, reusable
• Latex-free and DEHP-free

AM43423-01

Rico sani-liner suction bags are plastic, disposable, and fit inside the Rico aspirator containers.RI1019

Rigid Suction Canister with Tubing & Solidifier features:

• Elbow-less canister makes finding, connecting and misplacing spare parts like elbows a thing of the past
• Horizontal ports eliminate the need for elbows
• New lid design simplifies use and helps reduce OR turnaround time

• Durable plastic container system designed for collecting and retaining aspirated materials
• Float shut-off with built-in filter increases flow, eliminating damaging backflow to the suction regulator
• Foam guard and float valve ultrasonically welded in place, preventing premature shutoff
• Lids constructed with common ports and connectors
• Port caps attached to lid, which saves time
• Patient port designed with 20° angle to prevent kinked tubing - no separate adapter required
• Universal design easily fits wall mounts

• Disposable
• Size: 800mL
• A self sealing lid provides a leak-free seal when vacuum is applied.
• An automatic float shut-off provides protection against canister overflow.