Pulse Oximeters

* Reads SpO2 and pulse rate * Accuracy: SpO2 ±3% / HR ±2 BPM * 6 Changeable display modes * 10 Display brightness settings * Pediatric * Fits fingers with a thickness of 0.3in to 0.44in * Carry lanyard * Soft carry case * Two ”AAA” batteries * Instruction booklet * Meets or exceeds ISO 9919 * Dimensions: 1.9in x 1.1in x 1.1in

Affordability in a fingertip Pulse Oximeter. This unit features a single directional LED display that includes a pulse rate monitor, an Spo2 monitor and a pleth bar. The automatic switch-off feature preserves battery life. This Pulse Oximeter has an improved 2-color OLED display with 6 display modes, including Sp02, Pulse Rate and the pleth waveform. The automatic switch-off feature preserves battery life. * Simple & convenient operation * Spo2%, PR are displayed on screen * Light, compact (50g including two AAA batteries) * Low power consumption * Indication of low power consumption * Two display modes

This pulse oximeter is ideal for use in any situation where a fast and accurate reading of blood oxygen saturation and pulse rate is needed. Features: * Small and lightweight design * No additional sensors needed * Dual color OLED display * SpO2, PR, pulse bar, plethysmogram * 6 Display modes * Low power consumption * Accommodates a wide range of finger thicknesses * 30-hour of continuous use; 2500 spot checks * Includes 2 AAA batteries and a lanyard MD300C2

The Nonin Co-Pilot centralizes five noninvasive patient monitoring parameters into a single device that was designed to withstand the wear and tear of mobile care settings. Request Demo Features: * Sensors connect to wireless signal processor which transmits patient readings to a handheld display, allowing for remote monitoring of up to 30 feet * Single sensor (8330AA) measures pulse oximetry (SpO2), pulse rate (PR), carboxyhemoglobin (COHb) and Methemoglobin (MetHb) * Pulse Oximetry (SpO2) – accurate and reliable pulse oximetry, even in difficult patient conditions such as hypoxia, CO poisoning, and motion * COHb – monitor patients for carbon monoxide poisoning or use for fire fighter rehabilitation even in the presence of hypoxia * Compliant to ISO 60601 EMS Standards including radio frequency immunity, water ingress of IP33, and drop tested at a height of 1 meter * Cerebral and Tissue Oximetry (rSO2) monitoring – Until now, it was not possible to measure cerebral oxygenation noninvasively with a simple handheld device. Use rSO2 monitoring to measure brain oxygenation during CPR or tissue oxygenation during ECMO. System Components: * (1) Display (D-HH) * (1) Wireless Signal Processor (SP-BLE) * (1) Carrying Case * (2) Chargers * (1) 8330AA Multi-Sensing Finger Clip Sensor * (1) Data Download Cable * (1) USB Flash Drive * (1) Quick Start Guide

The Rad-57 can ship with or be field upgraded with carboxyhemoglobin (SpCO), methemoglobin (SpMet), total hemoglobin (SpHb), oxygen content (SpOC), and/or PVI When shipped with rainbow parameters.* Continuous monitoring in a portable, handheld device* Quick and easy to use* Rugged and llightweight, ideal for field or hospital settings* Low signal I.Q.® (SIQ) indicator identifies conditions of low measurement confidence* Up to 72hr of trending memory* 4 AA Alkaline batteries

More than 100 independent and objective studies demonstrate Masimo SET® provides the most reliable oxygen saturation (SpO2) and pulse rate (PR) measurements under challenging clinical conditions, including patient motion and low peripheral perfusion. Masimo rainbow® technology analyzes multiple wavelengths of light to measure SET® measurements, total hemoglobin (SpHb®), carboxyhemoglobin (SpCO®), methemoglobin (SpMet®), and oxygen content (SpOC™). Pleth Variability Index (PVI®) is a breakthrough measurement that may help clinicians noninvasively and continuously assess fluid status of patients.MA3735

The Nellcor™™ portable SpO2 patient monitoring system, is a convenient, handheld monitor that is ideal for spot-checks or continuous monitoring in various healthcare and home use settings. The monitoring system includes a vivid 3-inch color LCD screen, and connectivity to analytic tools and patient management systems.* Small, llightweight, ergonomic handheld monitor for continuous and spot-check pulse oximetry monitoring* Supports a robust data set, including real-time SpO2 and PR values, SatSeconds alarm management, pleth waveform, blip bar and tabular trend data* Supports standard and home-care modes for use in hospital, hospital-type facilities, transport, mobile environments and home-care environments* Supports sleep study mode, which enables the clinician to dim the LCD display and silence alarms to prevent disruption of patients’ sleep* Nellcor™ advanced signal processing technology delivers

* Accurately measures oxygen saturation of arterial hemoglobin and pulse rate * Accommodates a wide range of fingers sizes, circumference approximately 20–75mm, user weight approximately 33 lbs ~ 242 lbs (15KG~110KG) * Four display modes * Display Blood-Oxygen Saturation (SpO2), Pulse Rate and Pulse Bar * No prescription required * Low battery indicator * Automatic shut-off * Includes: pulse oximeter, canvas storage pouch, lanyard, two AAA batteries and detailed English/Spanish instructions

A portable, feature rich pulse oximeter that provides spot readings of SpO2 and heart rate for the busy healthcare professional.* Reads SpO2 and pulse rate* Accuracy: SpO2 ±2-3% / HR ±5 BPM* 6 Changeable display modes* 10 Display brightness settings* 25% Smaller than competing models* Fits fingers with a thickness of 0.31in to 0.79in (8mm to 20mm)* Dual color OLED display* Hinged battery cover is more secure* Complete with carry lanyard and black rubberized bumper. (Optional orange bumper sold separately)* 2 "AAA" batteries* Instruction booklet* Meets or exceeds ISO 9919

M-LNCS Adtx SpO2 Adhesive Sensor. Adult size. 36in.

Accurately measures oxygen saturation of arterial hemoglobin and pulse rate. * Accommodates a wide range of fingers sizes, circumference approximately 20–75mm, user weight approximately 33 lbs ~ 242 lbs (15KG~110KG) * Large LCD display with red digital readout * Display Blood-Oxygen Saturation (SpO2), Pulse Rate and Pulse Bar * No prescription required * Low battery indicator * Includes: Pulse oximeter, lanyard, two AAA batteries and detailed English/Spanish instructions

Curaplex® Select Onyx Vantage finger pulse oximeter with PurSAT® technology captures SpO2 and pulse rate measurements - even on patients where low perfusion is a challenge. Features: * Clinician-facing, bright LED * Three-color pulse quality indicator LED - Green, yellow or red light provides a quick assessment of patient pulse quality * PureSAT technology - provides accuracy in situations that are challenging such as light-to-dark skinned patients or good-to-low perfusion * One product for pediatric to adult patients - adjusts to each patient and accommodates a wide range of finger thicknesses: 8mm to 25.4mm * Automatic turn on and off * Oxygen saturation range – 0 to 100% * Pulse rate range – 18 to 300 pulses/min * Comfortable to carry at just 2oz * Easy battery access * Lead-free and latex-free construction * Made in USA * Efficient – up to 6,000 spot checks or 36 hours of continual operation on two AAA batteries * Accurate – wide range of patient populations and settings, including low perfusion * Durable – resistant to dropping and water spills

More than 100 independent and objective studies demonstrate Masimo SET® provides the most reliable oxygen saturation (SpO2) and pulse rate (PR) measurements under challenging clinical conditions, including patient motion and low peripheral perfusion. Masimo rainbow® technology analyzes multiple wavelengths of light to measure SET® measurements, total hemoglobin (SpHb®), carboxyhemoglobin (SpCO®), methemoglobin (SpMet®), and oxygen content (SpOC™). Pleth Variability Index (PVI®) is a breakthrough measurement that may help clinicians noninvasively and continuously assess fluid status of patients.MA3734

Rainbow R20 Pediatric Adhesive Sensors for Patients 10-50kg. Box of 10.

The BCI 3301 Hand-Held Pulse Oximeter delivers quick and reliable pulse oximetry whenever spot checking is needed. The BCI 3301 features an ergonomic design, an easy-to-read display and a proven ability to accurately indicate SpO2 and pulse rate for patients of all ages. Features: * Rugged, ergonomic design * Bright LED display * Two-button operation * Powered by 3 C-cell batteries * Can use all SMPM sensors BCI3301

The Nonin Onyx Vantage 9590 Finger Pulse Oximeter is a small, lightweight, portable device indicated for use in measuring and displaying functional oxygen saturation of arterial hemoglobin (%SpO2) and pulse rate of patients who are well or poorly perfused. It is intended for spot-checking of adult and pediatric patients on digits (fingers, thumb, toes) in a wide-range of environments. Delivers accurate measurements, even for patients with low perfusion or darker skin tones. Nonin PureSAT® technology captures SpO2 and pulse rate measurements quickly and accurately. Provides up to 6,000 spot checks on two AAA batteries and includes a 4-year warranty. Clinician-facing, bright LED allows SpO2 and pulse rate readings from any angle, in all lighting conditions, day or night. Three-color pulse quality indicator LED provides quick assessment of patient pulse quality. Fits pediatric to adult patients; accommodates fingers, thumbs, or toes from 8mm to 25.4mm (0.3in to 1.0in). Power turns on when applied and off when removed. Withstands a minimum of 50 drops and exceeds IP32 water ingress testing requirements. Weighs less than two ounces and can be taken anywhere. Black.* Reliable performance* Exclusive features* Lasting value* PureSAT® technology* Easy to read* Pulse quality indicator* Wide fit range* Automatic switching* Long battery life* Durable construction* Portable and compact

Masimo LNCS DB-I SpO2 * 3ft Reusable Sensor * Size: Adult

The Nonin® Onyx® II features: * Ideal for use in any situation where a fast accurate reading of blood oxygen saturation and pulse rate is needed * Small, lightweight, and can be carried on a lanyard or in your pocket * Large LED display offers a wide viewing angle for optimum visibility of patient readings, day or night * Improved design of the battery door for more convenient battery access * Pulse quality indicator is bright and easy-to-see * For quick and accurate assessments of patient readings * Superior accuracy - in low perfusion * Durable – designed for the most demanding environments * Simple - automatic on/off operation * Efficient new turn-off mechanism allows for 2,500 spotchecks or 21hr of continuous use * Versatile – Accommodates widest range of finger sizes from pediatric to adult * Enhanced design – smaller size with an enclosed spring and easier battery access Dimensions: 1.31 inch x 2.22 inch x 1.27 inch Weight: 1.89 oz (53.5 g)

Affordability in a fingertip pulse oximeter. This unit features a single directional LED display that includes a pulse rate monitor, an SP02 monitor and a pleth bar. The automatic switch-off feature preserves battery life.* Simple and convenient operation* Sp02%, PR are displayed on screen* Light, compact (50g including two AAA batteries)* Low power consumption* Indication of low power consumption* Two display modes

Curaplex® Select Onyx Vantage finger pulse oximeter with PurSAT® technology captures SpO2 and pulse rate measurements - even on patients where low perfusion is a challenge. Features: * Clinician-facing, bright LED * Three-color pulse quality indicator LED - Green, yellow or red light provides a quick assessment of patient pulse quality * PureSAT technology - provides accuracy in situations that are challenging such as light-to-dark skinned patients or good-to-low perfusion * One product for pediatric to adult patients - adjusts to each patient and accommodates a wide range of finger thicknesses: 8mm to 25.4mm * Automatic turn on and off * Oxygen saturation range – 0 to 100% * Pulse rate range – 18 to 300 pulses/min * Comfortable to carry at just 2oz * Easy battery access * Lead-free and latex-free construction * Made in USA * Efficient – up to 6,000 spot checks or 36 hours of continual operation on two AAA batteries * Accurate – wide range of patient populations and settings, including low perfusion * Durable – resistant to dropping and water spills

The H100B pulse oximeter provides a simple universal tool for patient monitoring - from spot checks to continuous monitoring. All monitoring data can be transferred to PC for storage, management, review and printing.* RTC (real time clock) display* Backlight control and automatic power-off function for power saving* SpO2 and pulse rate measurement* Display numeric and waveform of SpO2 simultaneously* Long battery life - up to 48hr on 4 AA or 36hr on Ni-MH rechargeable batteries* Powerful data storage capacity* Data can be transferred to PC for storage, review and printing* The latest 10min trend graph and table of SpO2 and pulse rate can be reviewed in the screen* Audible and visible alarm capability* Pitch tone

BCI® Oximetry Cables features: * Length: 5ft * Compatible with: * Autocorr® Pulse Oximeter, Autocorr® Plus Pulse Oximeter and Spectro2 ® BCI3311

Airway Adapter * For 9840 Series Pulse Oximeter. NO9840AAT

More than 100 independent and objective studies demonstrate Masimo SET® provides the most reliable oxygen saturation (SpO2) and pulse rate (PR) measurements under challenging clinical conditions, including patient motion and low peripheral perfusion. Masimo rainbow® technology analyzes multiple wavelengths of light to measure SET® measurements, total hemoglobin (SpHb®), carboxyhemoglobin (SpCO®), methemoglobin (SpMet®), and oxygen content (SpOC™). Pleth Variability Index (PVI®) is a breakthrough measurement that may help clinicians noninvasively and continuously assess fluid status of patients.