CPAP Accessories

The BiTrac ED Full Face Mask features an OmniClip™ with multi-positioning silicone forehead pad. For use with Pulmodyne O2-MAX disposable CPAP system.

Valved T adapter for disposable CPAP system. * One arm 22mm female * One arm 22mm male

Advanced Design Masks * Uniquely formulated, latex free, non-reticulating foam seal * Virtually leak free and conforms to a variety of facial morphologies, beards and tubing * Very comfortable for the patient Patient Exhalation Valve * Reduces the inspiratory work of breathing while maintaining CPAP during exhalation * Large 3600“swivel”port directs exhalation and can accommodate a standard 30mm bacterial/viral filter

The GO-PAP is a disposable emergency CPAP device, that runs off of the barbed valve outlet on an O2 source. It operates at 10LPM and like our O2-MAX™ delivers approximately 30% FiO2. You also get the option of 5, 7.5, and 10cm of PEEP. The PEEP Settings are independent of flow, so you never have to worry about adjusting your flow to maintain your PEEP levels. This eliminates the need to read from confusing charts, or monitor manometers. Just set it and forget it, and concentrate on caring for your patient. The GO-PAP System Includes: * GO-PAP Generator * O2 Supply Line * BiTrac ED™ Mask and Headstrap * OmniClip™ * Nebulizing Canister * Neb-Connect

The O-Two single-use open CPAP delivery system provides incredibly accurate CPAP delivery for such a compact device. By minimizing the pressure drop on inspiration and the peak pressure on expiration, the O-Two single-use open CPAP delivery system produces a more uniform CPAP pressure throughout the respiratory cycle. This provides a lower work of breathing for the patient when compared to other, commonly used, prehospital devices. Ideal for the treatment of the respiratory impaired patient suffering from a range of obstructive pulmonary diseases, the O-Two CPAP system is a simple, cost-effective alternative to invasive ventilation and possible intensive care admissions. O-Two CPAP Advantages * Small and lightweight: Complete system weighs only four ounces (0.1 kg) * Low oxygen consumption: Only 8-25 L/min for 5-25 cmH2O of CPAP * Simple to use: Flow control adjustment to set CPAP level * Wide CPAP range: 5-25 cmH2O * No ambulance downtime in ER: Simply attach to the ER oxygen supply * Decreased work of breathing: Open circuit design imposes no work on the patient * Comfortable and secure head harness options: Soft, conforming Neoprene or traditional “Full Crown” head harness * Small size: Fits into existing jump bags and storage compartments * Cost effective: Low purchase price and low oxygen consumption compared to other devices * Nebulizer kit: Allows nebulized medications to be provided during CPAP treatment * Available pressure manometer * 1.6in Diameter x 2.3in (CPAP Device Only) OT01CV0211-CS

PerformaTrak™ SE Face Mask features adjustable forehead support, head strap clips, standard elbow for use with Esprit® critical care ventilator with an internal safety system.

Variable Trio Control Unit for Pulmodyne O2-MAX™ Trio CPAP System. Features: * 6in oxygen hose * DISS connector

* 30mm Male x 30mm Female * Filter, BFE and VFE 99.99%

Valved ”T” adapter for use with Pulmodyne O2-MAX CPAP System. * One arm 22mm male * One arm 30mm female

The MaxShield now comes in more sizes to accommodate the pediatric patient population. Like the adult line, the pediatric line offers a full perimeter fit, which allows for a clear line of sight, to aid in reducing claustrophobia. This also allows for a quicker and more simple fitting process. ​ The standard elbow can be used with a dual limb circuit, and Anti-Asphyxia with leak elbow can be used with a single limb circuit. The MaxShield also comes with a bonnet style headgear with a soft foam for patient comfort. * Life Stage: XS Mask * Bonnet size: XS * The anti-asphyxia with leak elbow is used for a single limb circuit * Bonnect style headgear, with soft foam, for patient comfort * Full perimeter mask which aids in reducing claustrophobia

15mmF/30mmM Blue Adapter for Go-PAP Connection

CPAP circuit with medium mask features: * Disposable * Single Use

Connector for pediatric CPAP kit.

The EZPAP® positive airway pressure system is used to expand the lungs by increasing Functional Residue Capacity (FRC). Increasing FRC has been found to contribute to the prevention and reversal of atelectasis. EzPAP® is the easy option for the prevention and treatment of atelectasis and a medical need for lung expansion therapy. When incentive spirometry alone won't open patient's airways, expand your options with EzPAP®. It makes providing positive airway pressure positively easy. Simply connect to a flow meter (wall air or O2 for enhanced FiO2), adjust 5-15 lpm, and instruct the patient to breathe normally through the mouthpiece or mask. Just a few minutes of therapy, as needed - not for hours at a time. EzPAP® features a pressure port for connection to a gauge (recommended for initial use with each patient), and a standard 22 mm OD fitting to accommodate a mouthpiece or 3 mask options. The EzPAP® Positive Airway Pressure System includes the EzPAP® lung expansion device, mouthpiece, pressure port cap, and 7 feet of tubing. Features: * Use with mouthpiece or mask attachment * 22 OD patient end * Scalloped ambient air inlet * Pressure port with cap * Complete procedural kit * Disposable manometer * Single patient use Benefits: * Can be used with mask or mouthpiece attachment * Allows use with inline nebulizer when fitted with tee adapter Prevents inadvertent occlusion * Connects to gauge tubing * Eliminates collecting components * Eliminates the need to carry a manometer Three mask options are also available.

The Valved Tee™ Adapter makes it simple to deliver aerosolized medication to your ventilator patients. Used in conjunction with a small volume nebulizer, the Valved Tee™ offers a safe and effective way to introduce the aerosol into the circuit. Unlike other tee adapters that require time-consuming and potentially hazardous breaks in the system, the Valved Tee™ is a permanent part of the ventilator circuit. Its unique valve opens and closes as the nebulizer is inserted and removed.

Includes: * Bitrac ED Mask * Size: Large * Standard Elbow Adaptor * 30mm

The MaxShield now comes in more sizes to accommodate the pediatric patient population. Like the adult line, the pediatric line offers a full perimeter fit, which allows for a clear line of sight, to aid in reducing claustrophobia. This also allows for a quicker and more simple fitting process. ​ The standard elbow can be used with a dual limb circuit, and Anti-Asphyxia with leak elbow can be used with a single limb circuit. The MaxShield also comes with a bonnet style headgear with a soft foam for patient comfort. * Life Stage: XXS Mask * Bonnet size: XXS * The anti-asphyxia with leak elbow is used for a single limb circuit * Bonnect style headgear, with soft foam, for patient comfort * Full perimeter mask which aids in reducing claustrophobia

CPAP circuit with large mask features: * Disposable * Single Use

PerformaTrak™ Face Mask features adjustable forehead support that is designed to minimize mask force at the bridge of the nose. Also offers installed and ready-to-use head strap.

* Molded, not stamped * Reinforced holes on adult size for extra durability * Neoprene * Center vents for comfort and fit at back of head * Individually wrapped

acapella® combines the benefits of both PEP therapy and airway vibrations to mobilize pulmonary secretions and can be used in virtually any spatial orientation. acapella® DM & DH Vibratory PEP Therapy System features: * Color-coded * Blue-DM <15 lpm for 3 seconds * Green-DH ≥15 lpm for 3 seconds * Inspiratory Valve * 22mm OD ambient end * 22mm OD patient end * Expiratory resistance dial * Patented rocker mechanism Use of acapella® DM & DH Vibratory PEP Therapy System has many benefits, including: * Allows inhalation and exhalation without removing from mouth * Prolongs expiratory airflow to increase removal of secretions * Allows use with mask or mouthpiece attachment * Allows use with inline nebulizer when fitted with tee adapter. * Accommodates virtually any patient’s lung capacity. * Can be used in any position - patient is free to sit, stand or recline

The BiTrac MaxShield creates a low pressure seal and sits gently on the face. The cushions seal and gentle application, combined with the full perimeter fitting, helps to prevent nasal skin breakdown. It also helps to simplify the mask fitting process. This mask offers two fixed elbows which include the Standard Elbow and the Anti-Asphyxia Elbow.

O2-RESQ™ O2-CPAP valve is single patient use eliminating the need to track durable equipment and concerns about cross contamination.

The O2-MAX™ is a disposable CPAP system for use in a wide range of respiratory distress conditions. The O2-MAX fixed system includes a fixed flow generator that delivers 30% FiO2 with flow rates up to 140 l/m and a 4” (100 mm) O2 hose and DISS connector. The O2-MAX is compatible with the 3-SET (Simple Effective Titration) O2-CPAP Valve with adjustable pressure settings from 5.0, 7.5 and 10.0 cm H2O. The valve allows the clinician to titrate the level of CPAP without carrying additional equipment. * O2 Max BiTrac ED Mask * Ohmeda Quik Connect * Fixed Flow Generator * 3-SET O2-CPAP Valve (5.0/7.5/10.0cm) * Life Stage: Adult, Large