Pulse Oximetry Accessories

LNCS, or Low Noise Cabled Sensors, are available in a wide variety of designs to serve the needs of many types of patients. LNCS sensors are intended for hospitals that prefer to minimize clinician-user-interface change when upgrading their pulse oximetry to Masimo SET® and do not anticipate adopting rainbow® technology. LNCS sensors are cabled with a DB9 connector, compatible with LNC patient cables, which enables use with Masimo SET® pulse oximeters and Nellcor sensor-compatible instruments without OxiMax®.

Additional patient cables are available to connect LNCS sensors to a variety of pulse oximeters and multi-parameter monitors equipped with Masimo SET®. Adapter cables are also available for monitors with conventional Nellcor technology, allowing standardization on sensors throughout a facility with a mixed inventory of pulse oximeters.

LNCS sensors provide excellent SpO2 performance while facilitating patient comfort with a connector positioned away from the sensor application site. Specialty LNCS sensors with built-in intelligence are available for patients with limited or no access to digits or patients with extremely low perfusion.

• Appropriate for short- or long-term monitoring of adult, pediatric, infant, and neonatal patients
• Designed for finger, toe, thumb, hand, or foot application, offering secure positioning of the optical components
• SofTouch™ sensors are designed for patients with fragile skin and feature a non-adhesive wrap made from soft foam material, with hook-and-loop attachment
• Minimize the risk of cross-contamination
• Available in neonatal to adult sizes

M-LNCS, or Low Noise Cabled Sensors, are intended for hospitals that prefer to minimize clinician-user-interface change when upgrading their pulse oximetry to Masimo SET® or Masimo rainbow SET™.

• M-LNCS sensors are compatible with Masimo SET® pulse oximeters and Nellcor sensor compatible instruments without OxiMax®
• Standard Cabled Disposable SensorsConnects to all Masimo SET® oximeters via M-LNC or rainbow® patient cables*
• Multiple designs to serve the needs of many patient types

• Disposable
• For use with Connex Spot Monitor 
• With a 1-Meter Cable
• Stretchable, breathable cloth material
  • Easier placement and fit, for hard-to-fit patients such as infants and neonates
• Adhesive, tear-resistant cloth
  • Designed for easy and secure placement, as well as frequent repositioning
• Comes in Neonatal, Infant, Pediatric and Adult

Masimo M-LNCS DC-I® SpO2 Sensor features:

• Designed as the reusable partner product for LNCS adhesive sensors
• New cable connector design improves moisture resistance
• Covered connector provides additional protection from liquid at all times
• Performs under conditions of motion and low perfusion
• Connects to Masimo SET® oximeters via LNC™ patient cable
• Multiple designs to serve the needs of many patient types
• Size: Adult

In the world of EMS, speed is everything. Making quick, informed decisions can be the difference in patient outcomes. The Assurance® Nasal Alar SpO2™ Sensor is your “one and done” solution for fast, accurate and dependable SpO2 readings.

This single-patient-use sensor maintains its placement on the nasal ala comfortably, without adhesives. The sensor is easily removed and reapplied, eliminating the waste associated with trying multiple sensors to get a good signal. The sensor’s receiver is inside the nose naturally protecting it from the interferences of ambient light and making it less susceptible to dropout caused by noise and vibrations during EMS transportation.

Features:

• Earlier detection
• More reliable monitoring of low perfusion
• Dependable monitoring
• Easy access to the alar site
• Immune to ambient light
• Less susceptible to high noise and vibration environments
• For use with compatible pulse oximeters including Nellcor OxiMax and Oxisensor II and Philips FAST compatible monitors

Philips offers a versatile family of disposable SpO2 sensors that fit a broad range of patients from neonates to large adults. They are designed to precise specifications and meet a wide range of standards that have been set by regulatory authorities and standardization committees.

• For the M1131A sensor, BTM item # 2712-13113, the patient size application is greater than 44 lbs with any finger except the thumb.
• For the M1132A sensor, BTM Item # 2712-13201, it is used for infants between 6.6 to 22 lbs on any finger or toe.
• For the M133A sensor, BTM item # 2712-13313, for an infant less than 6.6 lb, it can be used on the foot or hand. For children between 22 to 44 lbs, this sensor can be used on the big toe or thumb. For children and adults greater than 88 lbs, this sensor can be used on any finger except the thumb.

• Size: Adult
• Cable Length: 3 feet
• For use with RC (Rainbow or SpO2/SpCO/SpMET) Patient Cable
• For use with LifePak 15

• For use with
  • The LifePak 15
  • M-LNCS
  • Rainbow R Sensors
• Cable Length: 4ft

• Designed as the reusable partner product for M-LNCS adhesive sensors
• Covered connector provides additional protection from liquid at all times
• Performs under conditions of motion and low perfusion
• Connects to Masimo SET® oximeters via M-LNC™or rainbow patient cables
• Multiple designs to serve the needs of many patient types

Adult Disposable SpO2 Sensors
The disposable sensors are ideal for extended monitoring or situations where the risk of cross-contamination is high. The disposable sensors are made of soft cable, cushioned sensor, and are available in Microfoam, Transpore and Medplast adhesive wraps to provide patient's ultimate comfort.

The sensor is placed with an easy to use over-wrap that acts as a stabilizer for securing the sensor in position and can be repositioned if needed.

Pediatric Disposable SpO2 Sensors
The disposable sensors are ideal for extended monitoring or situations where the risk of cross-contamination is high. The disposable sensors are made of soft cable, cushioned sensor, and are available in Microfoam and Transpore  adhesive wraps to provide patient's ultimate comfort.

The sensor is placed with an easy to use over-wrap that acts as a stabilizer for securing the sensor in position and can be repositioned if needed.

Infant Disposable SpO2 Sensors
The disposable microfoam sensors are ideal for extended monitoring or situations where the risk of cross-contamination is high. The disposable sensors are made of soft cable, cushioned sensor, and foam adhesive wrap to provide patient's ultimate comfort.

The sensor is placed with an easy to use over-wrap that acts as a stabilizer for securing the sensor in position and can be repositioned if needed.

Neonate Disposable SpO2 Sensors
The disposable sensors are ideal for extended monitoring or situations where the risk of cross-contamination is high. The disposable sensors are made of soft cable, cushioned sensor, and are available in Microfoam and Medplast adhesive wraps to provide patient's ultimate comfort.

The sensor is placed with an easy to use over-wrap that acts as a stabilizer for securing the sensor in position and can be repositioned if needed.

• Size: Adult
• SpO2 only sensor
• For use with RC (Rainbow or SpO2 only) patient cable

• 20-pin Connector

Carrying case for 8500 Series Pulse Oximeter features:

• Color: Black
• Handle for easy carry
• Holds 8500 monitor and sensor

• Direct connect (Rainbow) patient sensor
• Sizes: Pediatric to Adult
• Cable
• For use with LifePak 15

• Size: Adult (10-50kg)
• Rainbow Adhesive sensor
• For use with RC (Rainbow or SpO2 only) patient cable
• Single patient use

M-LNCS Neo-3 SpO2, Neonatal/Adult Pulse Oximeter Adhesive Sensor, 3ft

• Accurate and Dependable
• Reusable
• Produces a high-intensity PureLight® spectrum
  • Eliminates variations in readings from patient-to-patient and sensor-to-sensor
  • PureLight® LEDs do not cause a shift in the oximeters calibration curve at SpO2 Levels below 80%
• Comfortable, self-aligning grips to assure proper placement
• Quick and easy application
• Cost-Effective
• Easy-to-clean
• Ideal for short-term monitoring, stress testing and spot checks 
  • Any situation where the risk of cross-contamination is low
• Each is designed for a specific application and is form-fitted to decrease ambient light interference
• Variety of finger, earlobe and forehead sensors for various monitoring applications
• With Cable varying in sizes: 1m, 2m, 3m
• Nonin® Medical has designed an array of PureLight reusable sensors for patients of all sizes (adult, pediatric, & infant) and clinical presentations