CPAP Units

This O2-MAX disposable CPAP device features a closed system nebulization port giving you the flexibility to nebulize when your patient needs it, all while continuing to deliver positive and consistent pressure.

The O2-Max is a disposable CPAP system made for use in a wide range of respiratory distress conditions. It plugs directly into the DISS Port to generate flows up to 140 lpm, with consistent and unrestricted flow throughout your patient's treatment.

The O2-MAX™ is a disposable CPAP system for use in a wide range of respiratory distress conditions. It is available as a variable or fixed system. The variable system includes a variable flow generator that delivers oxygen from 30% to 100% FiO2 with flow rates up to 140 l/m and a 120” (3 m) O2 hose and DISS connector. The fixed system includes a fixed flow generator that delivers 30% FiO2 with flow rates up to 140 l/m and a 4” (100 mm) O2 hose and DISS connector.

The O2-MAX is compatible with the 3-SET™ (Simple Effective Titration) O2-CPAP™ Valve with adjustable pressure settings from 5.0, 7.5 and 10.0 cm H2O and 5-SET™ O2-CPAP™ Valve with adjustable pressure settings from 5.0, 7.5, 10.0, 12.5, and 15.0 cm H2O. The valve allows the clinician to titrate the level of CPAP without carrying additional equipment.

O2-MAX™ System Features:

• BiTrac ED Full Face Mask and head strap or head gear
• Expandable (up to 72 inches) Anti-Asphyxia Circuit w/10 cm CPAP Valve
• FIXED Flow Generator with 4 inch (100mm) O2 Hose and DISS Connector
• Adapter (22mm Male x 30mm Male)

The GO-PAP is a disposable emergency CPAP device, that runs off of the barbed valve outlet on an O2 source. It operates at 10LPM and like our O2-MAX™ delivers approximately 30% FiO2. You also get the option of 5, 7.5, and 10cm of PEEP.

The PEEP Settings are independent of flow, so you never have to worry about adjusting your flow to maintain your PEEP levels. This eliminates the need to read from confusing charts, or monitor manometers.

Just set it and forget it, and concentrate on caring for your patient.

The GO-PAP System Includes:

• GO-PAP Generator
• O2 Supply Line
• BiTrac ED™ Mask and Headstrap
• OmniClip™
• Nebulizing Canister (Optional)

The O2-Max Trio System is made for use in a wide range of respiratory distress conditions. It plugs directly into the DISS Port for consistent and unrestricted flow throughout your patient's treatment. You can customize your FiO2 by approximately 30%, 60%, or 90% just by turning the knob located directly above the generator.  It also comes with an easy to use 3-SET™ O2-CPAP™ Valve, but has 5-SET™ and fixed PEEP pressures from 2.5 to 20cm available as well. 

The O2-MAX mask has nebulization built right into the circuit. Choose to nebulize your patient, or choose not to with this new closed circuit nebulization feature. Apply nebulization during treatment without interfering with your CPAP therapy. Need to add more medication? Not a problem, just use the needleless entry port on your cannister to apply prescribed medication during your CPAP treatment. 

The Curaplex GO-PAP™ Capno Kits combine the GO-PAP™ disposable emergency CPAP mask with a Smart CapnoLine CO2 sampling line in a compact, convenient kit.

The GO-PAP is a disposable emergency CPAP device, that runs off of the barbed valve outlet on an O2 source. It operates at 10LPM and like our O2-MAX™ delivers approximately 30% FiO2. You also get the option of 5, 7.5, and 10cm of PEEP.

The PEEP Settings are independent of flow, so you never have to worry about adjusting your flow to maintain your PEEP levels. This eliminates the need to read from confusing charts, or monitor manometers.

Just set it and forget it, and concentrate on caring for your patient.

The GO-PAP System Includes:

• GO-PAP Generator
• O2 Supply Line
• BiTrac ED™ Mask and Headstrap
• OmniClip™
• Nebulizing Canister
• Neb-Connect

• O2-MAX™ Trio BiTrac ED mask, with Neb
• Smart CapnoLine Plus (oral/nasal with O2 tubing)
• Microstream ETCO sampling directions for use

The O2-MAX^™ CPAP System is made for use in a wide range of respiratory distress conditions. It plugs directly into the DISS Port to generate flows up to 140lpm, with consistent and unrestricted flow throughout your patient's treatment. 

Available with 5cm, 7.5cm or 10cm FIXED PEEP Valve.

Includes:

• Bitrac ED Full Face Mask and HEAD STRAP
• Expandable Anti-Asphyxia Circuit w/CPAP Valve
• Flow generator w/4" O2 Hose and DISS
• Adapter (22mm Male x 30mm Male)

The O2-MAX^™ Trio system comes with the following:

• BiTrac ED^™ full face mask with HEAD STRAP
• Expandable anti-asphyxia circuit with CPAP valve
• Variable 30/60/90 FiO2 flow generator with 6" O2 hose
• DISS connector
• Adapter (22 mm Male x 30 mm Male)

The O2-MAX System delivers continuous positive airway pressure (CPAP) throughout the breathing cycle. It provides CPAP at preset levels throughout inspiration and exhalation, independent of the patients flow rate. O2-MAX System is intended for use on spontaneously breathing patients; there is no assembly required.

O2-MAX™ System features

• BiTrac ED Full Face Mask and Head Strap
• 72 inch Smooth ID Anti-Asphyxia Circuit with 3-SET O2-CPAP Valve (5.0/7.5/10.0 cm)
• VARIABLE Flow Generator with 120 inch (3 meter) O2 Hose and DISS Connector
• Adapter (22mmM x 30mmM)

• 72 inch Corrugated Anti-Asphyxia Circuit
• O2-CPAP™ Valve
• Mask and Head Strap
• BiTrac ED Full Face Mask features an OmniClip™ with multi-positioning silicone forehead pad
• O2-CPAP™ Valves provide fixed pressure at any flow rate

The Continuous Positive Airway Pressure system is a disposable respiratory aid device intended for use in the hospital and pre-hospital environment to provide non-invasive ventilation to the patient in respiratory distress.

• Small and lightweight: Complete system weighs only 4OZ (0.1kg)
• Low oxygen consumption: Only 8 to 25L/min for 5 to 25cm H2O of CPAP
• Simple to use: Flow control adjustment to set CPAP level
• Wide CPAP range: 5 to 25cm H2O
• No ambulance downtime in ER: simply attach to the ER oxygen supply
• Decreased work of breathing: Open circuit imposes no work on the patient
• Comfortable and secure head harness: Soft, conforming Neoprene material does not slip
• Small size: Fits into existing oxygen kits and storage compartments
• Optional pressure gauge
• 1.6in Diameter x 2.3in (CPAP Device Only)

WhisperPak™ CPAP Kits are compact procedure packs that contain components to deliver therapeutic CPAP to those in need. All packs are designed to be used with the WhisperFlow high flow generator.

The O2-MAX™ Trio system comes with the following :

• BiTrac ED^™  FULL FACE MASK with FULL CAP HEAD GEAR
• Expandable anti-asphyxia circuit with CPAP valve
• Variable 30/60/90 FiO2 flow generator with 6" O2 hose
• DISS connector and adapter (22 mmM x 30 mmM)

The O2-RESQ™ System is pre-assembled for ease of use and quick set up time. This Single Patient Use O2-RESQ™ System eliminates the need to keep track of durable equipment and concerns about cross contamination. Ideal for spontaneously breathing patients suffering from Congestive Heart Failure (CHF) and other Respiratory Distress Conditions.

The ADAPT-2-VENT™ is an adapter elbow that allows you to take the patient from CPAP to BiPAP with a simple switch. Save on time and cost, as there is no need to a re-fit a new mask. Go from bedside treatment, to transport &/or hospital with ease.

The BiTrac MaxShield Select™ Pediatric line provides noninvasive ventilation for the pediatric patient population.

• Anti-Asphyxia w/ Leak Elbow
  • to use with a single limb circuit
• Full face mask which aids in reducing claustrophobia
• XXS & XS come with a bonnet style headgear w/ soft foam for patient comfort
  • Adult Small size comes with standard headgear
• Sizes Available
  • XXSmall
  • XSmall
  • Adult Small

This item has been discontinued. At this time there is no suggested replacement for this item.

The O2-RESQ™ System is pre-assembled for ease of use and quick set up time. This Single Patient Use O2-RESQ™ System eliminates the need to keep track of durable equipment and concerns about cross contamination. Ideal for spontaneously breathing patients suffering from Congestive Heart Failure (CHF) and other Respiratory Distress Conditions.

Features:

• Flow Generator with Filter
• 72 inch Corrugated Anti-Asphyxia Circuit
• O2-CPAP™ Valve
• Mask and Head Strap
• Flow Generator provides 30% O2 concentration at a Continuous Flow up to 140L/min
• O2-CPAP™ Valves provide fixed pressure at any flow rate

This item has been discontinued. Please see suggested replacements in alternate products area below.

The O2-MAX™ is a disposable CPAP system for use in a wide range of respiratory distress conditions. It is available as a variable or fixed system. The variable system includes a variable flow generator that delivers oxygen from 30% to 100% FiO2 with flow rates up to 140 l/m and a 120” (3 m) O2 hose and DISS connector. The fixed system includes a fixed flow generator that delivers 30% FiO2 with flow rates up to 140 l/m and a 4” (100 mm) O2 hose and DISS connector.

The O2-MAX is compatible with the 3-SET™ (Simple Effective Titration) O2-CPAP™ Valve with adjustable pressure settings from 5.0, 7.5 and 10.0 cm H2O. The valve allows the clinician to titrate the level of CPAP without carrying additional equipment.

Specifications:

• Size: Adult Medium
• 3-SET™ O2-CPAP Valve
• Chemtron Quik-Connect
• BiTrac ED full face mask and head strap
• Expandable (up to 72in) anti-asphyxia circuit with 10cm CPAP valve
• Fixed flow generator with 4in (100mm) O2 hose and DISS connector
• Adapter (22mm Male x 30mm Male)