Ballistic Gear

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Male and Structured Female.

Our padded First Responder Carry Bag is the ideal storage for your First Responder gear needed at the ready. Large enough to house your loaded out plate carrier kit and helmet, it can be quickly deployed for easy access – so you are ready to respond at a moment’s notice.

The Triton is a steel plate measuring approximately .21” thick (without spall guard technology) with a weight of 6.3lbs in a 10×12 SH configuration. The Triton will address LE departments looking for an ASK (Active Shooter Kit) options and Fire/EMS departments looking for an affordable yet durable NIJ 0101.06 certified plate option. The Triton is certified to level III with a III+ rating (includes the 5.56x45mm M855/SS109 “green tip”) along with 2018 DEA certification.

Multi-shot rated on select threats, Polyurea coating, and 2018 DEA Certified. Made in the U.S.A. Fits into the rifle plate pocket of your plate carrier, tactical entry vest, or compatible overt body armor carrier. Now available with spall guard technology.

• Stops NIJ IIIA level threats
• Low profile design/designed for comfort
• 4-Point integrated harness with unique buckle system (no loose straps)
• Exceeds US army ACH impact standard

• NIJ 06 Level IIIA Soft Armor Ballistic ProtectionFront and back hard armor plate pockets able to receive multiple size plates
• Includes cummerbund-style Side Armor Protection with additional plate pouch
• Mil-Spec industrial reinforced webbing
• Front and back MOLLE modular attachment system (PALS compatible)
• Durable 1,000-denier Cordura nylon external carrier construction
• Adjustable hook and loop side straps – expandable up to 60 in.

• NIJ 06 Level IIIA Soft Armor Ballistic Protection
• Front and back hard armor plate pockets able to receive multiple size plates (plates sold separately)
• Mil-Spec industrial reinforced webbing
• Front and back MOLLE modular attachment system (PALS compatible)
• Durable 1,000-denier Cordura nylon external carrier construction
• Adjustable hook and loop side straps – expandable up to 60 in.

• 1 x Armor, Tactical Responder Vest MKII
• 1 x Bag, NAR-4 Chest Pouch
• 2 x C-A-T® Holder
• 4 x C-A-T®-Combat Application Tourniquet – BLK
• 2 x Emergency Trauma Dressing – 6 in.
• 2 x S-Rolled Gauze
• 2 x Nasopharyngeal Airway 28F with Lubricant
• 1 x HyFin® Vent Chest Seal Twin Pack
• 3 x pair Bear Claw™ Nitrile Gloves, Lg
• 1 x NAR Trauma Shears – 7.25 in.
• 1 x NAR Scissor Leash
• 4 x Combat Casualty Card
• 2 x Black Permanent Marker
• 1 x MED ID Patch
• 2 x Rescue Task Force Patch

Level III Plate Armor features:

• For use with North American rescue vests
• Steel
• Dimensions: 10in x 12in

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

The AMP-1 E specialized aramid shell is independently tested and certified at Chesapeake labs to NIJ IIIA (9mm and 44 Magnum), against fragmentation according to STANAG 2920 with a V50 rating of 2,230ft/s. Our standard features include an advanced padding system, wheel-dial system, and unique rail system. These components ensure that comfort, practicality, and capability are provided, giving the user an added degree of confidence. The unique rail-system and its Speed Connect System (SCS) gives the user even more tactical and modular protective capability. Our modular protective visors (Impact, Fragmentation, 9mm/44Mag) can be added/removed from the helmet in seconds without ever having to take off the helmet – always being protected. More recently we have increased the protective modular capabilities with our BAN-1/CAN-1 (Ballistic/Non-ballistic neck protection), BAM – 1/CAM-1 (Ballistic/Non-ballistic mandible/Chin guard and our non-ballistic visors with the rubbers seal.

Options / Accessories

• Non Ballistic Impact Visor (Independently tested (Chesapeake Labs) blunt impact tested to 100 Joules)
• Non Ballistic Impact Visor with rubber seal (Chesapeake Labs) blunt impact tested to 100 Joules)
• Non Ballistic Fragmentation visor (Independently tested (Chesapeake Labs) STANAG 2920 – 1,082 f/s)
• NIJ IIIA Ballistic Visor (Independently tested (Chesapeake Labs) 9mm/44 Mag)
• VPAM Ballistic Visor Independently tested (Melrichstadt Labs)
• Ballistic neck protection (9mm Ballistic and non-ballistic) – Independently tested (Melrichstadt Labs)
• Ballistic Mandible/Chin guard (9mm tested)
• 3-Hole NVG Shroud
• Helmet Cover Black or Green
• Helmet hook and loop Kit
• Helmet Counter weight Kit
• Visor protective cover
• Side-rail adaptor
• Peltor adaptor

A basic protective carry bag for your ballistic or non-ballistic helmet.

Built upon end-user input, it is the first carrier of its kind to safely address a one-size-fits-most application with consideration of comfort, movement, and ballistic protection. The Hardcore FE can be quickly equipped with rifle plates via its top-loading external plate pockets. It is designed to protect personnel during Active Shooter or Hostile Event Response. The Hardcore FE offers ballistic protection without sacrificing mobility and versatility. The vest is adaptable to meet the needs of your team’s life-saving missions. Designed to fit BRAVO armor panels.

• Two Carrier styles: MOLLE webbing platform and Slick model (no MOLLE)
• Dynamic armored cummerbund for additional side protection
• Easy donning via multi-point fit adjustment system
• Integrated triple box stitched drag strap
• Padded shoulders and dual radio microphone tabs
• Shears/knife/flashlight pocket
• Top loading exterior accessible front and rear rifle plate pockets
• An effective ballistic protection vest solution that can be shared across all shifts
• Available in sizes M, L, XL, and 2XL - each size also offers an extra 10 inches in cummerbund adjustment over a standard cummerbund

The AEX35 is a cost-effective Aramid Level IIIA ballistic helmet Tested to the NIJ standard. It is an ACH full cut designed specifically with the patrol officer in mind. The bolt-less shell offers superior protection and the harness and padding system fits sizes S-XL.

Vortex™ body armor offers users the combined properties of strength, comfort and performance, all at an incredible value. The IIIA is great for concealed wear, but is also used by tactical teams across the country.

Versatile performance – An advanced combination of slim construction, lightweight fibers, and outstanding strength – the Vortex offers a versatile ballistic package.

Advanced protection – The Vortex armor has been built to match the most strenuous requirements, including our in-house special threat ballistic testing. This soft ballistic is capable of stopping some of the most advanced rounds, including the 5.7 x 28 Lead Free.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigorously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

• Quad Compliant
• NIJ 0101.06 Certified
• AE Special Threats
• DEA Protocol
• FBI Testing

• Front zip-side opening design
• Heavy duty outer shell
• Internal plate pockets, accommodating inserts for added protection
• Front and rear hard armor plate pockets accommodate rifle plate protection
• Mesh in key friction zones
• Zipper cover with camera mount
• Wire routing ports
• Two concealed ID tag and badge tab attachment points
• Ambidextrous utility pockets
• Adjustable shoulders with mic tabs
• Two Zippered Napoleon chest pocket
• Rear adjustable cummerbund with comfort stretch
• Reinforced Drag Handle
• Rear placard attachment
• Color: Black

OPTIONS & ACCESSORIES

• Remove MOLLE from pockets
• Multiple badge option attachment points

Ballistic insert only. Cummerbund is not included.

Streamlining your gear, minimizing bulk, and reducing weight is at the core of our Peraflex system pouches. They are specifically designed to work with the TORC, XT 2.0, and SAU tactical vests; as well as select Armor Express patrol carriers. By transitioning the pouch enclosure to an internal system, we utilize the structure of the core vest to keep the Peraflex pouch construction to a minimum. Lightweight, yet strong and flexible, this line offers the flexibility to customize your kit, while adding very few ounces. Able to be used in both front kangaroo or cummerbund configurations, which allow maximum modularity per user.

• Removes clutter and snag points while also reducing weight
• Slimline enough to secure your needed accessories inside the kangaroo or cummerbund on select vests without being too bulky

The First Spear® pouches are a top-of-the line solution that will pair perfectly with our Armor Express or Lighthawk Tactical products.

The AGENT Ballistic Vest RTF Kit, formerly known as the ELSA™ (Emergency Life-Saving Armor) RTF Kit, is an innovative, lightweight, compact AGENT Armor Carrier System incorporating soft armor protection and a bleeding control kit all contained in a small, discreet soft-sided briefcase. Medical pouch includes essential trauma equipment to provide immediate point-of-wounding care to injured casualties in accordance to Tactical Emergency Casualty Care (TECC) guidelines. Ideal to store in vehicle compartments or passenger spaces. Quickly and easily transforms into a customizable, mission-configurable soft armor carrier system with a bleeding control kit all in one swift pull of the zipper.

Ruggedly constructed of highly durable, Berry compliant 1,000 Denier Cordura® and the latest GhillieTEX™ hardware. Featuring padded shoulder straps and adjustment points at both the shoulders & waist to ensure maximum comfort and a secure fit. Includes generous MOLLE coverage on the front and back as well as two 4 in. x 10 in. hook and loop ID placards. Each carrier features two integrated armor pouches that accommodate 14 in. x 11 in. Level IIIA soft armor (included).

Kit Contents:

• 1 x Armor, AGENT Ballistic Vest Level IIIA Body Armor
• 2 x C-A-T®, Combat Application Tourniquet - BLK
• 2 x Emergency Trauma Dressing - 6 in.
• 2 x S-Rolled Gauze
• 2 x Nasopharyngeal Airway 28F with Lubricant
• 1 x HyFin® Vent Chest Seal Twin Pack
• 3 x pair Bear Claw™ Nitrile Gloves, Lg
• 1 x NAR Trauma Shears - 7.25 in.
• 1 x NAR Scissor Leash™
• 4 x Combat Casualty Card
• 2 x Black Permanent Marker
• 2 x C-A-T® Holder
• 1 x Bag, NAR-4 Chest Pouch
• 1 x MED ID Patch
• 2 x Rescue Task Force ID Patch

Agent Ballistic Vest RTF Kit Product Information Sheet

The Rescue Responder Side Armor Set features:

• NIJ 06 Level IIIA Soft Armor Ballistic Protection
• Cummerbund-style Side Armor Set compatible with the MKII Soft Armor Vest/Rescue Task Force Vest Kit
• Patent-pending assembly of ballistic materials that capture projectiles and disperse the energy over the entire surface of the panel
• Mil-Spec industrial reinforced webbing
• MOLLE modular attachment system (PALS compatible)
• Durable 1,000-denier Cordura nylon external carrier construction
• Adjustable hook and loop adjustable panels accommodate up to a 60 in. waist
• Blast mitigation configuration
• Made in the USA
• Side hard armor plate pouches for increased protection (plates not included)
• Proprietary assembly of ballistic materials

Available in various colors.

The AGENT Ballistic Vest is an innovative, lightweight and compact armor carrier system that can be used as an individual carrier, a Level IIIA soft armor system, a Level III/IV hard armor system or a combination soft and hard armor system. Designed to provide 11 inch x 14 inch soft armor and/or 10 inch x 12 inch hard armor front & rear coverage in a small, discreet storage configuration.

Features:

• Lightweight, compact armor carrier system providing ultimate coverage that is easily deployed yet conveniently stores in vehicle compartments or passenger spaces
• Fully adjustable hook and loop internal soft armor and hard plate stabilizers
• Front and back, hook and loop, high visibility ID panels
• Front and back, Mil-spec MOLLE modular attachment system (PALS compatible)
• Fully adjustable, padded shoulder straps, with adjustable quick release shoulder and side straps for a comfortable fit

The MOLLE Active Shooter Response kit allows officers to rapidly up-armor with a plate carrier to increase their level of protection, addressing the potential threat of rife or high-powered firearms typically encountered in an active shooter response situation. One size fits most.

Includes:

• (2) Level IV NIJ06 SA plates
• MOLLE compatible carrier for attachment of additional equipment pouches
• Carrier with upgraded padded shoulder straps
• ID Placards for Front/Back of Carrier
• Carry Bag