Infusion Pumps & Syringe Pumps

• Pressure infuser bag
• Designed for single patient use
  • Prevents cross contamination and eliminates costly cleaning and repair
• Infu-Stat gauge incorporates a pressure release at 325mm/hg
• Disposable
• Available in 500mL and 1000mL

• Set Length: 292 cm
• Priming Volume: 20 ml
• Bore: 2.7 mm
• 1 Spiked Drip Chamber(s) (Vented/Unvented)
• Drops per ml: 20
• Hydrophobic Air Inlet Filter (with Cap)
• 3 SmartSite® Valve Y Port
• 1 Roller Clamp(s)
• Pump Cassette
• 2 Back-Check Valve(s)
• 1 Male Luer(s)
• Rotating Male Luer(s)
• Natural rubber latex is not part of the material formulation
• DEHP free

The Infu-Surg® is an individually packaged disposable pressure infuser bag. Ethox International’s Infu-Surg was designed specifically for single patient use to prevent cross contamination. The Infu-Surg was recently redesigned to update its logo, color and silk-screen printing.

Product Features

• Color-coded pressure gauge
• Three-way stopcock for single-hand inflation or deflation
• Pressure relief valve
• Externally inflatable side port
• Available in 500ml and 1000ml models

Butterfly Winged Infusion Set includes thin wall stainless steel cannula, siliconized for easy insertion. Flexible wings hold the needle in position. Set is sterile and individually packaged.

Exel syringes feature:

• Sterile
• Non-toxic
• Pyrogen-free
• Not made from natural rubber latex

Unifusor® features: IV pole loop, fluid bag hook, white nylon cuff, reinforced translucent sleeve, no crimp tubing, palm-fitted handbulb, thumbwheel-type air control, aneroid gauge.

• Disposable

• Pressure relief valve prevents over inflation (330 mmHg pressure relief)
• Large, oval shaped bulb allows for quick and easy inflation of bladder
• Single-handed inflation and deflation design makes it easy to use and requires minimal training
• Color-coded dial gauge makes for accurate pressure monitoring (0-300 mmHg)
• Three-way stopcock ensures precise control of pressure
• Economical yet dependable pressure infusion choice
• Latex Free
• 1000ml

Unifusor is designed for rapid IV infusion and invasive pressure monitoring. The Unifusor line is the clear choice in pressure infusors.

• Manufactured without natural latex
• 100% leak tested during manufacturing process
• Reinforced translucent sleeve (see type of fluid and level through sleeve)
• IV pole loop
• Fluid bag hook

Vented/nonvented set for the Alaris Medystem III with no injection sites. Length 115in. Priming volume 20 mL.

Large inflation bulb has rapid recovery for quick, easy inflation Easy-to-use stopcock and bulb-to-tube fitted seal prevent leaks. High visibility patented gauge accurately indicates bladder pressure nylon netting makes loading easy and permits a clear view of fluid level.

• Disposable
• Vital signs

A precisely honed needle with ultra thin wall design assures ease of penetration and continued access with a single insertion. An exclusive, silicone lubricant provides smoother needle passage through tissue. And with the needles bonded to the wings at a slight downward angle, there is less risk of vessel damage or occlusion of the lumen. Soft and flexible, the wings readily conform to the body contour. Available in different sizes.

One of the newest infusion pumps on the market, The Sapphire Multi-Therapy.

Be empowered with a complete infusion system that delivers multiple therapies, for home care, hospitals and ambulatory settings. Sapphire drives the future of infusion care.

Features:

• Compact, lightweight device that is intuitive and easy to use
• Consistent accuracy with robust performance
• Single solution fits all, for any infusion need
• Software-driven and built-in adaptability
• Dimensions: 5.63in H x 3.78in W x 1.93 in D
• Weight (w/o battery): 14.7 ounces
• Accuracy: 
  • ​​​​​​​±2.5% under normal conditions (per IEC60601-2-24 standard)
• Battery:
  • ​​​​​​​Rechargeable Li-Ion battery 7.4V, 1960 mA/h, 24 hrs @ 125 mL/h (with a fully charged battery and backlight Off)
  • Recharge time: up to 6 hrs (when pump is not in operation)
• Flow rate: 
  • ​​​​​​​0.1 – 99.9 mL/h in increments of 0.1 mL/h
  • 100 – 999 mL/h in increments of 1 mL/h

Kit Includes:

• (1) Q Core Medical Sapphire Infusion Pump
• (1) Q Core Medical Sapphire Infusion Pump Mini Cradle
• (1) Q Core Medical Sapphire Infusion Pump AC Power Cord

Easy and Convenient
The ease of using the TruWave disposable pressure transducer (DPT) is immediately apparent from the ergonomical design that fits your hand, to the cable connector that has been designed to connect and disconnect easily.  The unique flow-through design provides an unimpeded fluid path for easy filling of the system. The protective connector sheath is water resistant and connects without pins. The test port minimizes troubleshooting by testing both the monitoring cables and disposable pressure transducer.

Includes:

• Flush Device
• IV Set (macrodrip)
• 60 inch and 12 inch Pressure Tube
• Two 3-way Stopcocks

SmartSite® infusion set features a check valve, 2 needle-free valve ports, 6in and 79in from 2-piece male luer lock. Approximate set length: 116in/295cm. Approximate priming volume: 18mL. 20 drop. Set contains an integrated safety clamp fitment to help prevent accidental free flow.CD2420-0500

Transducer Kit designed for single line includes drip chamber and is disposable.

Alaris MiniMed 3 AC charger.

• 3.6 volt lithium battery
• For Nimbus II EMS IV Infusion Pump

The Tru-Wave Pressure Transducer Monitoring Kit includes 48 inch and 12 inch pressure tubing, flush device, Single IV set, macrodrip chamber, and two 3-way stopcocks.

Unifusor® features: IV pole loop, fluid bag hook, white nylon cuff, reinforced translucent sleeve, no crimp tubing, palm-fitted handbulb, thumbwheel-type air control, aneroid gauge.

• Disposable

J8029

Large inflation bulb has rapid recovery for quick, easy inflation Easy-to-use stopcock and bulb-to-tube fitted seal prevent leaks. High visibility patented gauge accurately indicates bladder pressure nylon netting makes loading easy and permits a clear view of fluid level.

• Disposable
• Vital signs

Rapid Infusion Catheter Exchange Set, 8.5 French.

IV Infusion Set for 8100 Series Alaris Infusion Pump. Case of 20

Nimbus II EMS is a small, lightweight, smart, and durable infusion pump, making it a perfect candidate for emergency transport use. This pump is highly customizable with editable presets, protocols and global safeguards, and names. Included are industry standard operating modes such as weight based programming and continuous volume over time.

Includes:

• Infusion pump
• Clinician IFU booklet

Features:

• Dimension: 4.25in x 2.28in x 1.5in
• Weight: 6.14 oz
• Pump Mechanism: Linear Peristaltic
• Operating Mode: Weight-based and Continuous mode
• Max. Infusion Pressure: 30 psi
• Max. Time to Occlusion Alarm: 20 minutes
• VTBI: 1 - 1500mL by 0.1mL increment (single infusion VTBI maximum value is limited by remaining pump lifetime VTBI)
• Rate: 1 mL/h to 250 mL/h in 0.1 mL/h increments
• Drug Library: 12 Protocol Library
• Power Supply: AC/DC via Micro USB port, internally powered by battery (battery not rechargeable)
• Battery Life: 240h or 1500 mL of volume infused, whichever is reached first
• Alarms:
  • ​Cassettes loading error
  • System error
  • Firmware error
  • Upstream occlusion
  • Downstream occlusion
  • Battery Depleted
  • Invalid infusion parameter
  • Pump End-of-Life
  • Infusion complete
  • Pump Unattended
• Warnings:
  • Battery low
  • Approaching End-of-Life

• Single Pump IV Pole Mount
• for Nimbus II EMS Infusion Pump