new-products

The Curaplex® Tactical Occlusive Chest Seal (T.O.C.S.) is designed to treat open chest wounds. Each pouch includes two 6in by 6in non-vented occlusive dressings to seal entrance and exit wounds. Large pull tabs and flexible material are used to help facilitate application and repositioning on the trauma site if required. Made in the USA.

Features:

• Premium hydrogel
  • Helps adhesion where there is excessive bleeding, heavy perspiration, or wet conditions
  • Allows for the ability to reseal and burp the wound
• Tested to be effective on temperatures of -40°F to 161°F
• Compact and low profile fits into trauma packs for easy access
• Latex free
• Tested to MIL-STD-810G
• 5 Year Shelf Life
• Weight: 3.1oz
• Package: Sterile Unless Damaged or Opened

• Fast, easy and intuitive to apply
• Patented hydrogel base – Sticks and Stays Stuck!
• 4 large peripheral apertures allow drainage of air and blood
• Large central hole in base material allows quick accurate placement with reduced risk of obstructing the wound opening
• Low profile and highly flexible
• Compact: easy to pack into medical kit

• Dimensions: 7.87in x 5.90in
• Pack Dimensions: 5.51in x 5.12in
• Weight: 20.50gm

The RexONE Descent Control System (DCS) is a multi-function patient evacuation device designed for all levels of emergency responders. It provides the all versatility of the RexONE system with the added function of its new braking system. The DCS Hand Brake allows users control of speed while maneuvering down steep descents and stairwell evacuations.

The REX brake system consists of the following components:

• Forged alloy dual cable brake lever
• Single brake lever with dual wheel brake rods
• Heavy duty steel cabling and housing
• Locking Button system to maintain brake rods in locked position 

The Russell PneumoFix®-8 is a sterile decompression needle designed for the removal of fluid from the pleural cavity by appropriately trained medical professionals.

Features:

• Veress tip and indicator device to assist safe insertion with minimal risk of injuring underlying lung.
• Low pressure release valve to permit release of tension pneumothorax, with minimal potential of subsequent air re-entry.
• Catheter designed to have minimal risk of kinking.
• 14-Gauge for rapid venting.
• Depth markings printed on surface.
• Radio-opaque to be seen on X-ray imaging.
• Catheter tip holes to maximize drainage ability and minimize tip occlusion.

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Structured Female.

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Features:

The Traverse is an overt patrol vest that will convert your LEGACY or BRAVO concealable soft armor into a front zip-side opening system. This vest offers both MOLLE and Dress configurations along with optional features to meet your departmental requirements. Available in either a LEGACY or BRAVO configuration.

Options/Accessories(MOLLE)

• Remove MOLLE from pockets (MOLLE version)
• Multiple badge option attachment points

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Male and Structured Female.

The surprisingly comfortable FMS™ is our most cost effective body armor system. Meets DoD Frag Protection.

Cost Effective Ballistic System – For officers seeking a solid performing, yet affordable NIJ 0101.06 ballistic package – the FMS ballistic offering in level II and IIIA is a top performer at a reasonable price.

Trusted by our troops – The FMS IIIA is the primary armor system trusted by the US Army Military Police. Top tier performance coupled with an attractive price point make it a great solution for your armor needs.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigrously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Male and Structured Female.

Vortex™ body armor offers users the combined properties of strength, comfort and performance, all at an incredible value. The IIIA is great for concealed wear, but is also used by tactical teams across the country.

Versatile performance – An advanced combination of slim construction, lightweight fibers, and outstanding strength – the Vortex offers a versatile ballistic package.

Advanced protection – The Vortex armor has been built to match the most strenuous requirements, including our in-house special threat ballistic testing. This soft ballistic is capable of stopping some of the most advanced rounds, including the 5.7 x 28 Lead Free.

Each of our ballistic lines is tested beyond the NIJ Standard – in-house, with special threat requirements as deemed necessary by you, our customer. Our goal is to give you the peace-of-mind that can only come with watching your purchase be put to the test, right before your eyes. Our in-house testing facility is state of the art, and our capabilities are beyond many of the certified labs in the field today.

Soft armor comes protected in a seam-sealed ripstop pad cover. Each configuration is certified to the National Institute of Justice (NIJ) Standards, as well as vigorously tested in-house at our Ballistic Research Laboratory (BRL). During testing we go above and beyond the anticipated testing protocols in order to ensure that our armor products are second to none.

Built upon end-user input, it is the first carrier of its kind to safely address a one-size-fits-most application with consideration of comfort, movement, and ballistic protection. The Hardcore FE can be quickly equipped with rifle plates via its top-loading external plate pockets. It is designed to protect personnel during Active Shooter or Hostile Event Response. The Hardcore FE offers ballistic protection without sacrificing mobility and versatility. The vest is adaptable to meet the needs of your team’s life-saving missions. Designed to fit BRAVO armor panels.

Our padded First Responder Carry Bag is the ideal storage for your First Responder gear needed at the ready. Large enough to house your loaded out plate carrier kit and helmet, it can be quickly deployed for easy access – so you are ready to respond at a moment’s notice.

The AMP-1 E specialized aramid shell is independently tested and certified at Chesapeake labs to NIJ IIIA (9mm and 44 Magnum), against fragmentation according to STANAG 2920 with a V50 rating of 2,230ft/s. Our standard features include an advanced padding system, wheel-dial system, and unique rail system. These components ensure that comfort, practicality, and capability are provided, giving the user an added degree of confidence. The unique rail-system and its Speed Connect System (SCS) gives the user even more tactical and modular protective capability. Our modular protective visors (Impact, Fragmentation, 9mm/44Mag) can be added/removed from the helmet in seconds without ever having to take off the helmet – always being protected. More recently we have increased the protective modular capabilities with our BAN-1/CAN-1 (Ballistic/Non-ballistic neck protection), BAM – 1/CAM-1 (Ballistic/Non-ballistic mandible/Chin guard and our non-ballistic visors with the rubbers seal.

Options / Accessories

• Non Ballistic Impact Visor (Independently tested (Chesapeake Labs) blunt impact tested to 100 Joules)
• Non Ballistic Impact Visor with rubber seal (Chesapeake Labs) blunt impact tested to 100 Joules)
• Non Ballistic Fragmentation visor (Independently tested (Chesapeake Labs) STANAG 2920 – 1,082 f/s)
• NIJ IIIA Ballistic Visor (Independently tested (Chesapeake Labs) 9mm/44 Mag)
• VPAM Ballistic Visor Independently tested (Melrichstadt Labs)
• Ballistic neck protection (9mm Ballistic and non-ballistic) – Independently tested (Melrichstadt Labs)
• Ballistic Mandible/Chin guard (9mm tested)
• 3-Hole NVG Shroud
• Helmet Cover Black or Green
• Helmet hook and loop Kit
• Helmet Counter weight Kit
• Visor protective cover
• Side-rail adaptor
• Peltor adaptor

A basic protective carry bag for your ballistic or non-ballistic helmet.

• Made of washed, fluff-dried 100% cotton gauze
• Open, crinkle weave provides quick wicking, maximum absorbency, and greater aeration
• Finished edges reduces linting and loose threads
• Adds bulk and loft that will conform as needed, secure dressings in place, and cushion the wound
• Not made with natural rubber latex
• Available in Sterile or Non-Sterile

The Curaplex® Stop The Bleed® Kits are designed to provide its user with immediate access to products intended to stop traumatic hemorrhaging. The Stop The Bleed® Multi-Pack fits into a standard AED case, first aid cabinet or drawer. It conveniently bundles four individually vacuum-packed basic Stop The Bleed® Kits into a compact red pouch with clear plastic front.

• (4) Curaplex Stop the Bleed® Kits, Basic
• (1) Stop The Bleed® sticker

Dimensions:

• Length: 12.5in
• Width: 10in
• Height: 3in

Q-ACR4

The AmbuMan is a highly developed instruction and training manikin for the simulation of realistic and correct anatomical and physiological conditions during cardiopulmonary resuscitation by means of rescue breathing and chest compression.

• Patented Hygienic system
• Adjustable chest stiffness
• Wireless computer connection

Like all Ambu BLS manikins the Ambu Man has the patented hygienic system that eliminates the risk of cross infections. All trainees receive their own face piece and head bag for the training. At the end of the training the face piece can be cleaned and the head back is discarded. A truly 100% hygienic way of training.

To create more variance in the training, the stiffness of the chest can be changed and adjusted with just one screw.

The AmbuMan W (Wireless) does not need cables and wires. Which means it can be placed in realistic surroundings away from computers and power supplies. This gives a great amount of freedom during training and because there are no wires or cables lying around it gives an even more realistic scenario. The manikin is also equipped with a mechanical monitoring instrument showing effectiveness of the resuscitation, including results achieved for ventilation volume and depth of external chest compression. Moreover it indicates any stomach inflation and incorrect hand positioning.

The AmbuMan I (Instrument) models are equipped only with a mechanical monitoring instrument showing effectiveness of the resuscitation, including results achieved for ventilation volume and depth of external chest compression. Moreover it indicates any stomach inflation and incorrect hand positioning.

The airway of all manikins open only when head is correctly hyper extended. A carotid pulse can be activated manually by the instructor. It is also activated during chest compressions.

The lifelike anatomy makes it suitable for training of correct placement of defib pads in training use of Automated External Defibrillators (AED). 

AmbuMan meets the new 2019 AHA requirement (rate, depth & recoil)​.

➤ Request a demo

The Curaplex Quick-Connect Carrier is a back board that comes with 4 restraint straps, and has a load capacity of 450lbs.

The NIO is an automatic intraosseous device packaged for safe, quick, and easy vascular access. No drills, no batteries, no extra parts.

Features:

• Sterile
• Vascular access in as few as 10 seconds
• Disposable and single use
• No external power source or battery needed
• Pocket-sized and lightweight - 3.5 oz
• No maintenance required
• Patient-friendly, no exposed needle
• Assembled ready to use in package

➤ Discover more about NIO®
➤ Request a demo

• Easy to use
• Minimizes pain
• Safe, single-use design
• Proven reliability
• Eco-friendly design
• Depth penetration: 2.2mm 
• 21, 25, 28 Gauge needles

Curaplex Emesis Basins are available in kidney and rectangle shapes.

The Curaplex Foam Electrode features highly conductive wet gel with secure adhesion that ensures excellent signal quality during ECG monitoring. The flexible foam backing material ensures ease of use, as well as comfort to the patient during the application.

Features:

• Highly conductive wet gel
• Secure adhesion
• Comfortable foam backing
• Electrode Size (LxW): 50mm x 48mm

The Curaplex Vented T.O.C.S. includes:

• (2) Chest Dressings
  • To treat open chest wounds 

Each pouch includes:

• (1) H*VENT
  • Designed to relieve pressure from an open chest wound due to air in the chest (pneumothorax) or bodily fluid (hemothorax) 
• (1) Nonvented dressing
• Large pull tabs and flexible material
  • Help facilitate application and repositioning on the trauma site if required

Features:

• Contains (1) H*VENT chest seal and (1) non-vented occlusive seal for both entrance and exit wounds
• Multi-directional vented dressing allows the fluids to “drain towards gravity,” allowing patient to be transported on his or her side
• Backup fail-safe system since there are 6 ports
  • Even if 5 become obstructed, the vent will remain fully operational
• Unique dome membrane design creates a complete seal around the wound area
  • Ensuring a complete seal around the wound
  • Reducing the risk of air or fluid finding alternate paths
• Large vent openings on the H*VENT allow for visual monitoring of the wound
• The dome design gives quick indication of air or fluid leaving the chest (billows up) or when the seal is in place (suctions down)
• Proven in internal testing to retain a seal during inhalation and to maintain a sustainable negative pressure (below ambient pressure) within the pleural space
• Lowest profile of any vented chest seal and easy to fold.
• Tested to be effective on temperatures of -40°F to 161°F
• Latex-free
• Made in the USA
• Package Dimensions: 8.25in x 8.25in
• Package Weight: 3.1 oz
• 5 Year Shelf Life
• Sterile (unless damaged or opened)

Retractable Length-Based Resuscitation Tape