Circuits & Accessories

The mechanical filter uses a multilayered, pleated filtration medium. This medium provides greater filtration efficiency compared to electrostatic filters. DAR™ mechanical filters feature a pleated filter medium that significantly increases bacterial filtration efficiency. These high-performing filters can reach an NaCl efficiency of greater than 99.97%.

• Mechanical filter provides 99.99% bacterial filtration efficiency and 99.997% viral filtration efficiency
• Hydrophobic filter membrane helps prevent cross contamination caused by aerosolized droplets
• End tidal CO2 sampling port offers convenient access to exhaled gases
• Tested for HIV, hepatitis C and TBC filtration efficiency to help assure performance
• Filter media traps heat and moisture from expired gases to warm and humidify inspired gases
• Light weight, compact design reduces dead space
• Filters are supplied clean, individually packaged and ready for use

• Disposable
• Available with or without water trap

The FilterLine set circuit is a one-piece design, ideal for quick application in emergency intubations. By combining a FilterLine EtCO2 circuit with a microstream airway adapter, the FilterLine set eliminates time consuming assembly and monitor setup. Compatible with LifePak® 12, LifePak® 15 and Philips MRx.

• 2-port design - reduces clogging from moisture and secretions
• Airway adapter - captures accurate readings with small sample lines
• Built-in water trap with hydrophobic filter - prevents moisture from entering the monitor while maintaining the laminar flow and excellent waveform
• Universal airway adapter size for connections to both 15mm or 22mm endotracheal or tracheostomy tubes, ventilator circuits, closed suction systems and other devices

Ventilation circuits designed for use with AutoVent™ ventilators.

Features:

• Single patient use

Manufacturer Brochure

• Circuit vent for the HT-50 ventilator
• Size: Adult/Pediatric, 22mm
• Water trap

Convienence pack includes:

• Clear-guard breathing filter
• Double swivel elbow
• 12 inch flextube,
• 22m

• Manufactured from the finest materials
• Durable
• High performance
• High quality

Curaplex® cold respiratory ventilator circuits

Features:

• (2) Cuff connectors at machine end and hanger
• 72 inches
• with segmented tubing and red cap on end
• 9ft Corrugated Tubing
• Compatible with ParaPAC circuit
• Size: Adult

Adult circuit hose includes:

• 1.8 m x 22 mm inspiration limb
• wye and 61 cm x 22 mm expiration limb

Pediatric circuit hose includes: 

• 1.8 m x 15 mm inspiration limb
• wye and 61 cm x 15 mm expiration limb
• 6ft, 15mm Hose

• Size: Adult
• Univeral J type circuit (non-heated)
• 6-foot circuit length
• 22 mm ventilator connection
• 22 mm corrugated tubing
• Exhalation Supply Line (0.137" I.D.) and Pressure Sensing Line (0.200" I.D.) with Tip Adapter
• 64 ml dead space
• For use with Allied AHP300

Pneupac® Single Limb Circuit without PEEP Valve features:

• Disposable
• Single Use

These disposable ventilation circuits feature a one-way patient valve to minimize dead space in the circuit. This ensures maximum oxygen delivery with every ventilation. Circuits contain three feet of corrugated tubing, a one-way duck-bill valve and a swivel connector capable of accepting a mask or an ET Tube.

• 3 feet corrugated tubing
• For use with the Allied Healthcare AutoVents.

Superset double swivel catheter mount, 22F - flip top cap with 7.6mm port - 22M/15F, ≥70mm-150mm

The Superset range of catheter mounts have a concertina design to allow for positioning control.  This allows the catheter mount to be set in any required position.

The design allows the adjustment of deadspace from 20ml to 40ml (code 3504: 15-36ml) and the adjustment of length from 70mm to 150mm, excluding connectors (code 3504) for total control.

The range is available with fixed and swivel elbows and a variety of ports for all applications. All Intersurgical port caps are retainable for safety; fixed to the port connectors to ensure that they cannot be misplaced in use.

Flip top cap with 7.6mm port

• For connection of all standard 7.6mm probes or suctioning.

Luer ports

• For secure attachment of gas sampling lines with luer lock fittings.

Double flip top cap with seal

• Opening the first tab on the cap allows for the introduction of a fibre optic bronchoscope whilst maintaining airway pressure. Opening the second tab allows for suctioning if required.

Single-limb patient circuit with PEEP valve features:

• Disposable
• Single Use

• Disposable
• For pediatric and adult

• CPAP Ventilator Circuits for Autovent 4000CPAP Transport Ventilator.

The CAREvent® ventilator/resuscitator accessories range have been designed for use with our automatic transport ventilators and resuscitators. These high quality/high performance components are an essential adjunct to our resuscitation and ventilation products. Because of their high quality, our transport ventilator circuits can be utilized on ventilators from other manufacturers however we do not recommend the use of other manufacturer’s products on our ventilators and resuscitators.

Features:

• Manufactured from the finest materials
• Durable
• High performance
• High quality

• Replacement Particle Filter For the AHP300 Ventilator.

These disposable ventilation circuits feature a one-way patient valve to minimize dead space in the circuit. This ensures maximum oxygen delivery with every ventilation.

• 3 feet corrugated tubing
• Exhalation filter
• For use with the Allied Healthcare AutoVent.

Disposable circuits for the BiPAP Vision.

• Size: Pediatric
• 4-foot circuit length
• 22 mm ID ventilator connection
• 15 mm corrugated tubing
• Exhalation Supply Line (0.137" I.D.) and Pressure Sensing Line (0.200" I.D.) with Tip Adapter
• 9.2 ml dead space
• For use with Allied AHP300

HEPA Filter, High Efficiency, with Heat Moisture Exchanger.

Portex® HMEs provide efficient heat and moisture recovery.

Features:

• All HMEs exhibit low resistance to flow and high moisture output which helps to minimize the loss of heat and moisture in ventilated or spontaneously breathing patients
• ISO standard tapered ends to assure a consistent leak-free seal
• Length: 6-1/2in

• Universal single limb
• Complete with main circuit hose, exhalation valve manifold, aerosol hose, patient elbow connector, proximal airway pressure line, exhalation valve line and humidifier limb

Expandable FlexTube Tubing features:

• The superset range of catheter mounts have a concertina design to allow for positioning control
  • Allows the catheter mount to be set in any required position
• The range is available with fixed and swivel elbows and a variety of ports for all applications
• All intersurgical port caps are retainable for safety
  • Fixed to the port connectors to ensure that they cannot be misplaced in use
• Flip top cap with 7.6mm port
  • For connection of all standard 7.6mm probes or suctioning
• Luer ports
  • For secure attachment of gas sampling lines with luer lock fittings
• Double flip top cap with seal -
  • Opening the first tab on the cap allows for the introduction of a fiber optic bronchoscope while maintaining airway pressure
  • Opening the second tab allows for suctioning if required
• Dimensions: 22mm x 15mm I.D.

Airway Flex Connector features:

• Straight Connector 
• w/o Sample Port
• Patient-end is 15mm ID and 22 mm OD
• Circuit-end has a 15 mm OD end
• Disposable