This pulse oximeter is ideal for use in any situation where a fast and accurate reading of blood oxygen saturation and pulse rate is needed.

Features:

• Small and lightweight design
• No additional sensors needed
• Dual color OLED display
• SpO2, PR, pulse bar, plethysmogram
• 6 Display modes
• Low power consumption
• Accommodates a wide range of finger thicknesses
• 30-hour of continuous use; 2500 spot checks
• Includes 2 AAA batteries and a lanyard

MD300C2

Curaplex® Select Onyx Vantage finger pulse oximeter with PurSAT® technology captures SpO2 and pulse rate measurements - even on patients where low perfusion is a challenge.

Features:

• Clinician-facing, bright LED
• Three-color pulse quality indicator LED - Green, yellow or red light provides a quick assessment of patient pulse quality
• PureSAT technology - provides accuracy in situations that are challenging such as light-to-dark skinned patients or good-to-low perfusion
• One product for pediatric to adult patients - adjusts to each patient and accommodates a wide range of finger thicknesses: 8mm to 25.4mm
• Automatic turn on and off
• Oxygen saturation range – 0 to 100%
• Pulse rate range – 18 to 300 pulses/min
• Comfortable to carry at just 2oz
• Easy battery access
• Lead-free and latex-free construction
• Made in USA
• Efficient – up to 6,000 spot checks or 36 hours of continual operation on two AAA batteries
• Accurate – wide range of patient populations and settings, including low perfusion
• Durable – resistant to dropping and water spills

NO9590RE

The Nonin® Onyx® II features:

• Ideal for use in any situation where a fast accurate reading of blood oxygen saturation and pulse rate is needed
• Small, lightweight, and can be carried on a lanyard or in your pocket
• Large LED display offers a wide viewing angle for optimum visibility of patient readings, day or night
• Improved design of the battery door for more convenient battery access
• Pulse quality indicator is bright and easy-to-see
  • For quick and accurate assessments of patient readings
• Superior accuracy - in low perfusion
• Durable – designed for the most demanding environments
• Simple - automatic on/off operation
• Efficient new turn-off mechanism allows for 2,500 spotchecks or 21hr of continuous use
• Versatile – Accommodates widest range of finger sizes from pediatric to adult
• Enhanced design – smaller size with an enclosed spring and easier battery access

Dimensions: 1.31 inch x 2.22 inch x 1.27 inch

Weight: 1.89 oz (53.5 g)

The Nonin® 8500 Handheld Pulse Oximeter features:

• A bright LED display
• Simple, maintenance-free operation
• Ideal for spot checks or transport monitoring
• 8500 can conveniently monitor infants, children and adults
• UL listed
• USAF approved and tested for helicopter vibration
•  
• Includes the adult sensor
• 6 AA batteries
  • 100 hours of battery life
• Weighs 10 oz.
• Dimensions: 3 inch W x 6 inch H x 1 inch D.

NO8500

The 9847 Pulse Oximetry w/CO2 Detection Unit features: 

• Tricolor Pulse Quality Indicator
• Drop and vibration tested
• Digital Displays
• 6 AA alkaline batteries
  • Provides up to 90 hrs of power
• CO2 Level - 8 Element Bar Graph
• Visual or Audible Indicators
• Breath Beep (Variable Pitch)
• Low Battery
• Apnea
• Easy-to-read visual display
• Compatible with the full range of Nonin Pulse Oximeter Sensors
• Alarm Disable
• Audible Alarm
• SpO2 and Pulse Rate
• Simultaneous or independent operation of the pulse oximeter and CO2 detector is possible
• Combines proven pulse oximetry technology with innovative CO2 detection

Includes:

• Pulse Oximetry
• CO2 sensors

OxiMax™ adhesive sensors are highly accurate and feature tear-resistant bandages that provide a comfortable, secure ""second-skin"" fit. The sensor bandage is also designed to prevent ambient light from interfering with SpO2 readings.

Product Features

• Sterile, single-patient-use sensors for neonates through adults.
• LoSat™ expanded accuracy range helps clinicians better manage patients in the challenging lower saturation ranges, such as infants with congenital heart disease.
• Compatible with OxiMax™ and earlier-generation Nellcor pulse oximetry.
• OxiMax™ digital memory chip enables special communication features when sensors are used with full-featured OxiMax™ pulse oximeters
• Sensor Messages relays troubleshooting tips for optimal sensor placement.
• Sensor Event Report allows alarm event history to travel with the patient for quick assessment at various points of care.

Philips offers a versatile family of disposable SpO2 sensors that fit a broad range of patients from neonates to large adults. They are designed to precise specifications and meet a wide range of standards that have been set by regulatory authorities and standardization committees.

• For the M1131A sensor, BTM item # 2712-13113, the patient size application is greater than 44 lbs with any finger except the thumb.
• For the M1132A sensor, BTM Item # 2712-13201, it is used for infants between 6.6 to 22 lbs on any finger or toe.
• For the M133A sensor, BTM item # 2712-13313, for an infant less than 6.6 lb, it can be used on the foot or hand. For children between 22 to 44 lbs, this sensor can be used on the big toe or thumb. For children and adults greater than 88 lbs, this sensor can be used on any finger except the thumb.

A portable, feature rich pulse oximeter that provides spot readings of SpO2 and heart rate for the busy healthcare professional.

• Reads SpO2 and pulse rate
• Accuracy: SpO2 ±2-3% / HR ±5 BPM
• 6 Changeable display modes
• 10 Display brightness settings
• 25% Smaller than competing models
• Fits fingers with a thickness of 0.31in to 0.79in (8mm to 20mm)
• Dual color OLED display
• Hinged battery cover is more secure
• Complete with carry lanyard and black rubberized bumper. (Optional orange bumper sold separately)
• 2 "AAA" batteries
• Instruction booklet
• Meets or exceeds ISO 9919

Oxisensor® II Adhesive Sensors maintain strong signals from weak pulses right from the start and provide a comfortable, secure fit for long-term monitoring.

Product Features

• Sterile for single-patient use to minimize the potential for cross-contamination
• Built in shielding for both the bandage and the cable to protect the signal during transmission.
• Bright, high-quality LEDs to maximize signal tracking capabilities.
• High quality, nonconstrictive, self-adhesive bandage material for a "second-skin" fit.
• Compatible with many leading patient monitoring systems.
• Available in different sizes.

Philips offers a family of durable, reusable sensors for continuous, non-invasive measurement of arterial oxygen saturation in patients ranging from neonates to small adults. The reusable one-piece design glove sensors are so durable, they can be totally immersed or wiped with many popular disinfectant solutions. The M1191B adult glove-style sensors (BTM item # LM1191A) have an improved design to comfortably accommodate a wide range of adult size fingers and can be plugged into Philips 8-pin monitors without an extension cable.

The BCI 3301 Hand-Held Pulse Oximeter delivers quick and reliable pulse oximetry whenever spot checking is needed. The BCI 3301 features an ergonomic design, an easy-to-read display and a proven ability to accurately indicate SpO2 and pulse rate for patients of all ages.

Features:

• Rugged, ergonomic design
• Bright LED display
• Two-button operation
• Powered by 3 C-cell batteries
• Can use all SMPM sensors

BCI3301

BCI Sensor is a disposable finger sensor.